General Catalogue 2007 - Ibemo Kazakhstan Ltd

TR501
TR521
RF Input/Output Products for Combination System
(flush mounted)
The RF EIB/KNX input/output
modules are used as an
interface between volt free
contacts of switches or
conventional pushbuttons at
input level and electrical devices
at output level for direct
control. These combination and
two-way products are able to
communicate with other RF or
TP wired products (via media
coupler TR130B). They are
particularly useful for renovating
or extending existing installations.
1 input + 1 output 10A
For creating simple lighting
functions for integrating in a
group, general controls or other
scenario functions by simple
programming.
Hager Catalogue 2007 • Tebis TX
2 inputs+1 output shutter/blind
For creating shutter control
function for integrating in a
group, general control or other
scenarion functions by simple
programming.
Installation
Link allocation is carried out
by configuration device TX100.
These products also communicate
with TP wired products
with the help of media coupler
TR130B.
General characteristics of RF
system
Frequency - 868,3 MHz
Range - variable according to
the environment - up to 30m
indoor, 100m in free air.
Noise measurement is possible
with the TX 100.
RF system
• Maximum number of RF
products = 256
• Maximum number of RF input
translations by the media
coupler to twisted pair output
products = 63
Designation Description Cat Ref.
1 input + 1 output 10A Power supply 250V AC 50Hz TR501
Functions of input 1 volt free input for
• ON/OFF, dimming pushbutton switch
• Priority setting 1 output -
• Scenarios • 10A AC1 230V AC
Functions of output • For manual control by
• ON/OFF control TX100
• Time delay • Output status display by
• 8 scenes LED
• Priority setting Dimensions : diameter 56 x 30mm
Product supplied with Two-way product for
input/output module transmitting and receiving
pre-configured for control
of the connected output
2 inputs + 1 output shutter/blind Power supply 230V AC 50Hz TR521
Functions of input -
• Up/Down by brief push > 400ms 2 inputs:
• Priority setting
Output for shutter motor - Volt free contact
• Scenarios 6A AC1 230V AC
Functions of output - • For manual control by TX100
• Up/Down control • Output status display by
• Inclination of flaps LED
• Alarm security for wind, rain Dimensions : diameter 52 x 27mm
• Time delay Two-way product for
• 8 scenes transmitting and receiving
• Priority setting
product supplied with
input/output module
pre-configured for control
of the connected output
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5.15
Tebis TX