General Catalogue 2007 - Ibemo Kazakhstan Ltd

TX 110, TX 111 Supply Modules
Functioning principle
This module is the supply source of the bus.
The output voltage is of the ELV 29V type ...
TX110 TX111
Power voltage 230 VM 50/60Hz
Output voltage 26 V 640 mA 29 V 320mA
Absorbed power 24 VA 15 VA
Connection: Rapid connection Screw terminal
Flexible 1.5� 0.75 to 2.5�
Rigid 2.5� 0.75 to 4�
Size 6 ❚ 4 ❚
Working temperature -5ºC to +45ºC
Storage temperature -20ºC to +70ºC
TG050 Wind Safety Detector
Composition of the products:
• An anemometer and its fixing support,
• Weatherproof interface box,
• The fixing screws of the box (piercing Δ 6 mm).
Electrical characteristics:
• Supply voltage : 230 VM 50 Hz,
• Contact type (wind safety) : 230 VM 4 A
(protection by slowed 4A fuse)
Functional characteristics:
• Wind speed threshold adjusting : up to 55km/h per potentiometer
factory setted 25km/h)
• Reaction time at the threshold excess : 3 seconds (5 seconds
max.)
• Wind blocking time : 10 minutes (fixed)
Environment:
• Class II insulation
• IP65 protection index
• Working temperature : -25 °C to + 50 °C.
Connection:
Capacity : 0.5 to 2.5�
Overall size:
• Size of weatherproof box (overall) : 80 x 100 x 52mm
• Centre distance from fixing : 90mm
5.26
Hager Catalogue 2007 • Technical
Basic Modules and Accessories
Electrical Connection TX110, TX111
Working Principle
To exploit the wind safety function with TX Tebis system, it will be
necessary to link the contact of the anemometer to an input of the
TS316 module and programme the wind safety link with the
configurator. The TG050 wind safety detector is used as protection
device for blinds against gusty winds.
If the speed of the wind measured by the anemometer exceeds for 3
consecutive seconds a threshold adjusted by potentiometer, the total
assembly of the blinds is launched instantaneously and the blinds are
maintained in high position for 10 minutes at the minimum.
(other controls become inactive)
If the speed of the wind has weakened sufficiently after 10 minutes,
the wind safety is deactivated; the control of the blinds is
authorized again.
Electrical connection
1 2 3 4 5 6 7 8
Towards input
230V of TX316
N Ph
230 VM
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com