General Catalogue 2007 - Ibemo Kazakhstan Ltd

TX100 configurator
The TX100 portable configurator is the tool which programs the
desired functions and displays the links between all the products
being found in an installation : wire products and/or unidirectional or
bi-directional radio system. If the system contains wire products, it is
necessary to use the media coupler TR130B. A SmartMedia memory
card inserted in TX100 backs-up all the data relating to a system.
Description of the keys
Back-light screen
Input
• Selects an input
number
• Select a function
allocated to the
selected input
• Move in the
menus
5.20
Start / Stop
Key
“Access to the
menu” (same
function as )
Output
• Selects an output
number
• Move in the menus
Alphanumerical Keys
Description of the keys:
Screenkeys
Function of each key is indicated on the screen
above them, the function changes depending on the
screen
• Validates the operation in progress
• Selects the menu
• Validates the entry
• Change the function of the keys on the left
(selection of either an input number or a function) - -
return to the previous menu
• Activates the selected output
• Starts the numbering of the outputs of the
installation
• Access to the help screens for installation
• Access to menus
Hager Catalogue 2007 • Technical
TX100 Configurator
Information relating
to inputs
Number of inputs piloting
the selected output (ex.
the output 25 is piloted by
2 inputs whose 17)
Total number of
defects of the
installation
Input number
Type of input
TP, RF
Function of the
input
Defect on the
displayed input
Number of
inputs on
the system
Description of the symbols:
Battery charge level
Sound
i
1
1
Output
Input
Radio product
Wire product
Preparation of a link
Link established
Delete a link
Information relating
to ouputs
Title bar
Number of outputs
linked to the input
displayed (ex: 5
outputs for the
input 17)
Output No.
Type of
output
Type of
output TP,
RF
Defect on
displayed
output
Number of
outputs of
the system
• A single “beep” indicates a succeeded operation
• A double “beep” indicates an operation which has
failed.
Trick
2 ways to select a channel :
• Selection of an input by acting on the appliance that control it :
push-button, switch or remote control. Selection of an output by
acting on the manual control of the output product.
• Selection of the inputs or outputs with TX100 by their numbers with
the help of keys
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com