General Catalogue 2007 - Ibemo Kazakhstan Ltd

Output module 4 shutters, blinds or curtains TXA 223, TXA 224,
TXA 225 and TXA 226.
The whole range of the products blinds and shutters is divided into
two applicatons :
• TXA223 and TXA225 modules manage the controls up, down and
stop. They are used to control roller shutters, awning blinds,...
• TXA224 and TXA226 modules manage the controls up, down, stop,
as well as the inclination of strips. They are used to control blinds
or curtains with strips.
Technical Characteristics
References TXA223, TXA224 TXA225, TXA226
Number of outputs 4 4
Breaking capacity 6A AC1 250VM 6A DC1 24V ...
Supply of module Bus 30V DC
Time setting between 2
controls of opposite direction
600ms
Max. dissipation of prodict 2W
Working temperature 0 to +45ºC
Storage temperature -20 to +70ºC
Degree of protection IP30
Width in modules 4
Connection flexible or rigid 0.75 to 2.5� quick connect terminals
Note : Connecting of motors
• Alternative current motors
Never connect any motors in parallel
• Continuous current motors
Two motors powered in CC can be connected in parallel
on condition to meet the nominal current of the TX225 or
TX226 modules
Hager Catalogue 2007 • Technical
The Output Products for Shutters and Blinds
The TXA 225 and TXA 226 products are used for direct current motor
control. The controls UP and DOWN are obtained by polarity
reversal.
In “Auto” mode, the movement orders come from the input modules
of the tebis system.
In “Menu” mode, these controls are accessible by the push-buttons
in front of the module (priority setting).
Electrical Connection
TXA223 / TXA224
Ph
N
Switch Auto/
Manu
PB for physcial
addressing
TXA225 / TXA226
24V ... +
Switch Auto/
Manu
PB for physcial
addressing
Visualisation of the
output state
Push-button for :
a) Programming
b) Priority setting of
the outputs in position
of the Auto/Manu
switch.
Following the
chronology below:
- 1st push : down
- 2nd push : STOP
- 3rd push : up
- 4th push : STOP
- 5th push : down
Visualisation of the output
state
Push-button for :
a) Programming
b) Priority setting of the
outputs in position of the
Auto/Manu switch.
Following the chronology
below:
- 1st push : down
- 2nd push : STOP
- 3rd push : up
- 4th push : STOP
- 5th push : down
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5.35
Tebis TX