Digilyzer DL1 User Manual
Digilyzer DL1 User Manual
Digilyzer DL1 User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
setup screen<br />
Basic Operation<br />
The setup screen allows to customize basic settings of the<br />
<strong>Digilyzer</strong>.<br />
Fig 4-07, Setup screen<br />
AuTo poWer oFF defines the time of the automatically switch off<br />
after the last key-press.<br />
AuTo LIGHT oFF defines how long the backlight stays on after<br />
being activated.<br />
ppM over THresH defines the number of full scale values, causing<br />
a clipping indication at the ppm meter.<br />
MuLTIpLe seTup allows four users to store their individual settings.<br />
To enable the multiple setup mode, set the corresponding entry to<br />
ENABLE. The next time the <strong>Digilyzer</strong> is switched on, the user will<br />
have to select the individual setup-ID (1, 2, 3 or 4) in the startup<br />
screen. All parameter settings in all measurement modes are now<br />
stored under this ID at the switch off and are recalled if this ID is<br />
selected at the next start up.<br />
Fig 4-08, Multiple user startup screen<br />
21
Change language