MAG-Manual - Refurbished Vending Machines

SECTION 4: MAINTENANCEDISASSEMBLING THE MAGFigure 4Removing the Bill Box (see Figure 4)Push the bill box tab forward while sliding the billbox upBILL BOX TABRemoving the Main Logic Board(see Figure 5)Using a small screwdriver, release the three tabs thatsecure the logic box to the main frame Separate thelogic box from the lid by releasing the four tabs with asmall screwdriver (Some units also have a tab thatsnaps between the two harness headers)BILL BOXUnplug the harnessing from the logic board and place thelogic board in a static-free areaFigure 5MAIN LOGIC BOARDLOGIC BOARDBOXLOCKING TABSLOGIC BOX LID12