prerequisite bidding requirements - R & R Fire Truck Repair, Inc.

Demo #3709 Smeal Fire Apparatus Co. 75’ Heavy Duty Aerialc. Chassis make, model, and serial numberd. GAWR of front and rear axlese. Front tire size and total rated capacity in pounds (kg)f. Rear tire size and total rated capacity in pounds (kg)g. Chassis weight distribution in pounds with water and manufacturer mounted equipment(front and rear)h. Engine make, model, serial number, rated horsepower and related speed, andgoverned speedi. Type of fuel and fuel tank capacityj. Electrical system voltage and alternator output in ampsk. Battery make, model, and capacity in cold cranking amps (CCA)l. Chassis transmission make, model, and serial number; and if so equipped, chassistransmission PTO(s) make, model, and gear ratiom. Pump make, model, rated capacity in gallons per minute (liters per minute whereapplicable), and serial numbern. Pump transmission make, model, serial number, and gear ratioo. Auxiliary pump make, model, rated capacity in gallons per minute (liters per minutewhere applicable), and serial numberp. Water tank certified capacity in gallons or litersq. Aerial device type, rated vertical height in feet (meters), rated horizontal reach in feet(meters), and rated capacity in pounds (kilograms)r. Paint manufacturer and paint number(s)s. Company name and signature of responsible company representative2. Certification of slip resistance of all stepping, standing, and walking surfaces3. If the apparatus has a fire pump, a copy of the following shall be provided: pumpmanufacturers certification of suction capability, apparatus manufacturers approval forstationary pumping applications, engine manufacturers certified brake horsepower curveshowing the maximum governed speed, pump manufacturers certification of thehydrostatic test, and the certification of inspection and test for the fire pump4. If the apparatus has an aerial device, the certification of inspection and test for the aerialdevice, and all the technical information required for inspections to comply with NFPA1914, Standard for Testing Fire Department Aerial Devices5. If the apparatus has a fixed line voltage power source, the certification of the test for thefixed power source6. If the apparatus is equipped with an air system, test results of the air quality, the SCBA fillstation, and the air system installation7. Weight documents from a certified scale showing actual loading on the front axle, rearaxle(s), and overall fire apparatus (with the water tank full but without personnel,equipment, and hose)8. Written load analysis and results of the electrical system performance tests9. When the apparatus is equipped with a water tank, the certification of water tank capacityOPERATION AND SERVICE DOCUMENTATIONThe contractor shall supply, at time of delivery, at least two sets of complete operation and servicedocumentation covering the completed apparatus as delivered and accepted.Revised 6/2/09 Page 9 of 114