Telenium IP install.pdf - TierOne Telecommunications

2-10 IP Module - AC/DC AdapterChapter 2 - System ComponentsIP Module - AC/DC AdapterEach module is packaged with an AC/DC adapter. The adapter is supplied with atwo-meter (six-foot) AC cord terminated with the nationally relevant AC blade type. Theadapter supports AC input power systems with rated voltage range of 100-240 VAC @50/60 Hz. The adapter provides 48 VDC at 0.8 amps. The DC output connector is cabledto the adapter with a two-meter (six-foot) cable as shown in the following illustration.Figure 2-7: AC/DC Adapterfor IP ModuleIP KeysetsThe Telenium IP will work with a number of telephone types including standard SLTs viaSLTM2 and the IP Keysets. The IP Keyset is available in the following configurations:Table 2-8: IP Keyset ModelsModelDescriptionIP-24DIP-24DHIP-DSSIP Phone 24BTN DisplayIP Phone 24BTN Display w/Switched Hub portIP Phone Direct Station SelectionLAN PortsThere are two IP Keyset models (IP-24D and IP-24DH) and a DSS console.The IP-24D has a single LAN port for connecting to the external 10/100 Base-T LAN.The IP-24DH model has two LAN ports and thus two RJ-45 connectors. One port is forconnecting to the LAN. The other can be connected to the network-ready PC. The portsare connected to an intelligent 10/100Base-T switch, which gives LAN access to the datadevice while giving priority to voice packets.DSS ConsoleIP-DSS, which is used to expand the number of Flexible buttons available to a user by48 buttons, has a single LAN port. When the console is locally powered with the AC/DCAdapter, the IP DSS can be connected to the 2 nd LAN port of the IP-24DH.