PNEG-1162CEX - DMC DIII Stir-Ator - David Manufacturing Co.

More documents

Recommendations

Info

5. Installation7. The final piece track will need to be cut and drilled to butt up to the first. Ensure no rough edges areleft and that the track is level and even all around the bin. (See Figure 5C.)Figure 5C Cut Final Piece to Fit8. Any long bin bolts adjacent to the track should be cut back or reversed to ensure they do not foul thetrack wheels when fitted. (See Figure 5D.)Suspension Chain InstallationFigure 5D Check clearance between long bin bolts.Suspension chains can now be lowered through the roof centre hatch.1. Space the suspension hooks equally apart around the center fill-hole collar. Note position in relationto the safety shut off switch (to be fitted later). (See Figure 5E on Page 11.)2. Lock the hooks in position using the holes provided.3. Note, if a safety switch and line is to be installed (NOT SUPPLIED), recommended locations are asshown below.10 PNEG-1162CEX DMC DIII Stir-Ator
5. InstallationFigure 5E Suspension Bar and Chain LocationsFigure 5F Typical Safety Switch InstallationPNEG-1162CEX DMC DIII Stir-Ator 11
Page 1 and 2: DMC DIII Stir-AtorOwner’s ManualP
Page 3 and 4: Table of ContentsContentsChapter 1
Page 5 and 6: Installation1. The correct installa
Page 7 and 8: 3. Bin LoadingUser’s must be awar
Page 9: 5. InstallationGSI RECOMMENDS THAT
Page 13 and 14: 5. Installation4. NOTE: Augers used
Page 15 and 16: 5. Installation10 mmFigure 5O Corre
Page 17 and 18: 5. Installation12. NOTE: 36' and la
Page 19 and 20: 5. Installation15. Attach the slip
Page 21 and 22: 5. InstallationCable glandsBeam box
Page 23 and 24: 5. Installation5 Core H07 cableFigu
Page 25 and 26: 5. InstallationNOTE: Installer must
Page 27 and 28: 5. InstallationCentre Suspension As
Page 29 and 30: 5. InstallationFigure 5AV Lock Unit
Page 31 and 32: 5. Installation6. Use a small grind
Page 33 and 34: 5. Installation9. Re-check and adju
Page 35 and 36: 7. WarrantyGSI Group, LLC Limited W

PNEG-1162CEX - DMC DIII Stir-Ator - David Manufacturing Co.

Create successful ePaper yourself

Delete template?

Save as template?