PNEG-1162CEX - DMC DIII Stir-Ator - David Manufacturing Co.

More documents

Recommendations

Info

5. Installation1/2" x 3" Boltand lock nutRoll pinFigure 5X Fit Slip Ring Unit14. Attach the slip ring anchor plate as shown in Figure 5Y.Anchor plateBoltFigure 5Y Fix Slip Ring Anchor Plate18 PNEG-1162CEX DMC DIII Stir-Ator
5. Installation15. Attach the slip ring top shaft support bracket, as shown in Figure 5Z.Bracket1/2" Grade 8bolt, lock nutand washerSlip ringFigure 5Z Fix Top Shaft Bracket16. Attach the beam box mount plate to the trolley as shown in Figure 5AA. Use four (4) 1/4" x 5/8" flangewhiz lock screws and nuts. Check the plate is the correct way up, as shown.Mount plateBolt andnut (4)Figure 5AA Fix Beam Box Mounting PlatePNEG-1162CEX DMC DIII Stir-Ator 19
Page 1 and 2: DMC DIII Stir-AtorOwner’s ManualP
Page 3 and 4: Table of ContentsContentsChapter 1
Page 5 and 6: Installation1. The correct installa
Page 7 and 8: 3. Bin LoadingUser’s must be awar
Page 9 and 10: 5. InstallationGSI RECOMMENDS THAT
Page 11 and 12: 5. InstallationFigure 5E Suspension
Page 13 and 14: 5. Installation4. NOTE: Augers used
Page 15 and 16: 5. Installation10 mmFigure 5O Corre
Page 17: 5. Installation12. NOTE: 36' and la
Page 21 and 22: 5. InstallationCable glandsBeam box
Page 23 and 24: 5. Installation5 Core H07 cableFigu
Page 25 and 26: 5. InstallationNOTE: Installer must
Page 27 and 28: 5. InstallationCentre Suspension As
Page 29 and 30: 5. InstallationFigure 5AV Lock Unit
Page 31 and 32: 5. Installation6. Use a small grind
Page 33 and 34: 5. Installation9. Re-check and adju
Page 35 and 36: 7. WarrantyGSI Group, LLC Limited W

PNEG-1162CEX - DMC DIII Stir-Ator - David Manufacturing Co.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?