PNEG-1162CEX - DMC DIII Stir-Ator - David Manufacturing Co.
PNEG-1162CEX - DMC DIII Stir-Ator - David Manufacturing Co.
PNEG-1162CEX - DMC DIII Stir-Ator - David Manufacturing Co.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. InstallationCable glandsBeam boxFigure 5AD Mount Beam Box on PlateThe unit is now ready for initial wiring. It is important that this is done before attaching the drive armto the drive wire so that the cable lengths can be checked to ensure the trolley can move freely.WiringCable RoutingNOTE: <strong>Co</strong>rrect cable must be used, as approved for use on mobile machinery. See the table for thecorrect cable types for the installation.<strong>Co</strong>nductor sizes given are minimum. The installing electrician must calculate the cable size required tosuit site conditions and to comply with relevant wiring and electrical regulations and codes.Figure 5AE General Wiring Scheme<strong>PNEG</strong>-<strong>1162CEX</strong> <strong>DMC</strong> <strong>DIII</strong> <strong>Stir</strong>-<strong>Ator</strong> 21
Change language