MA/FS-1535 SERIES - toshiba tec europe

4. DIAGNOSTIC TEST OPERATION EO18-11004A4.11 All RAM Read/Write Test4.11 All RAM Read/Write TestCAUTION!When this test is completed, RAM clear is performed which deletes all programmed data and salesdata stored in the memory of the ECR. (i.e., the ECR goes back to initial status.)(1) ContentsAll RAMs are checked.This test is repeated until the [CPN] key (for MA-1535)/[AT/TL] key (for FS-1535) in default keylayout is depressed.(2) OperationControl Lock: BLIND8013 [AT/TL](3) Print SampleThe number of banks installedEvery 10 times of this test, Date, Time, and Frequency of the test are printed.As of the end of this test, Date, Time, and Frequency of the test are printed.NOTES:1. Depressing the [CPN] key (for MA-1535)/[AT/TL] key (for FS-1535) in default key layoutwill issue a receipt, resulting that this test is completed. At this time, RAM clear isperformed.2. Every 10 times of this test, Date, Time, and Frequency of the test are printed on areceipt. Depressing the [CPN] key (for MA-1535)/[AT/TL] key (for FS-1535) in defaultkey layout will print Date, Time, and Frequency of the test as of this time, resulting thatthis test is completed.4-10