MCset 3 part1 user_manual - Schneider Electric

Instructions for accessto the inside of a cubicleRemoving front protectioncover platesCubicle with or without fixedvoltage transformer (VT)Close earthing switch (see chapter “Closingthe earthing switch”).It is recommended to padlock it in thisposition (see chapter “Padlocking andpreventing access using padlocks”).In the case of a cubicle equipped with afixed VT.Open the protection switch of the VTsecondaries which is located in theregrouping sleeve or in the LV compartment.ClosureTo place back into operation, carry outoperations in the reverse order of removal(closed earthing switch).Dismantle the panel (10 screws).Cubicle equipped with awithdrawable fusevoltagetransformerWithdraw VT fuses (see chapter“Withdrawing VT fuses”).Close earthing switch (see chapter “Closingthe earthing switch”).It is recommended to padlock it in thisposition (see chapter “Padlocking andpreventing access with padlocks”).12 07897302EN indice : C0