MCset 3 part1 user_manual - Schneider Electric

Instructions for accessto the inside of a cubicleDuring the first VT insertion, cutand remove the connector immobilisationbinding.Connect the VT low voltage connector.Access to lowercompartment (cables, CT,earthing switch, surgearresters)Safety rulesAll operations described hereaftermust be carried out in compliance withthe safety standards in force, under theresponsibility of a competent person.Access to the MV cable connectioncompartement is possible through themaintenance space by removing the cubiclemanhole sheet (see chapter “Removing themanhole sheet”).Accessing busbarsSafety rulesAll operations described hereafter must be carried out in compliance with the safetystandards in force, under the responsibility of a competent person.UpperFor access to busbars, see chapter “Instructions for access to the inside of the cubicle”.LowerAccess to lower busbars is possible through the maintenance space by removing the cubiclemanhole sheet.See chapter “Instructions for access to the inside of the cubicle”.07897302EN indice : C015