MCset 3 part1 user_manual - Schneider Electric

Instructions for accessto the inside of a cubicleAccessing plug-in pinsSafety rulesAll operations described hereafter must be carried out in compliance with the safetystandards in force, under the responsibility of a competent person.Opening and closing lower flapsUsing a screwdriver, raise the vane torelease the locking.Push the ball into the link axis.The flaps fall downwards up to locking.To close, pull the flaps upwards up tolocking.Opening and closing upper flapsUsing a screwdriver, raise the vane torelease the locking.Push the ball into the link axis.Push the flaps upwards up to locking.To close, pull the flaps downwards up tolocking.Before re-plugging in the mobile part, ensure that the shutters mechanisms haveBefore re-plugging in the mobile part, ensure that the shutters mechanisms havebeen put back into their initial position (locked closed). Failure to comply with this instructionmay result in damage to the equipment.16 07897302EN indice : C0