IWS_Training_Guide_v.. - FF-Automation

Chapter 3.InduSoft Web Studio ConfigurationsInduSoft Web Studio (IWS) is a licensed software product that is available in a number of configurations to meet yourapplication requirements. The two version of InduSoft software are InduSoft Web Studio and CEView, each availablein various maximum tag count configurations. Depending on the tag count configuration, a specified maximum numberof concurrent drivers will be supported.InduSoft Web StudioInduSoft Web Studio (IWS) is the name given to InduSoft’s full-featured software product. With IWS, the followingfeatures apply:• All development is done on a Windows XP, 2000, Server 2003, Vista or Windows NT-based PC• Applications can be developed to run on Windows XP, 2000, Server 2003, Vista or Windows NT-based PCs(or devices), or on Windows CE-based HMIs (or devices).• IWS is a licensed product that uses a key-based protection system. The protection key can be either aHardKey (USB or Parallel Port) or a SoftKey (license file)• IWS licenses can be purchased as development licenses or runtime-only licenses- A development license includes both the development (engineering) license and one runtime license.- The development (engineering) license and the runtime license can be placed on the same key(HardKey or SoftKey) or can be placed on separate keys.- Without a runtime license key, a runtime license will only work for 2 hours before automaticallyshutting down (demo mode).• IWS is licensed based on the maximum number of tags supported. (see Figure 2-1 for tag size versions).Based on the development license version purchased, a specifed number of concurrent drivers will besupported.• Runtime applications can be developed using up to the maximum number of tags supported by thedevelopment (engineering) license. If the runtime can use a smaller tag count license version, then additionalruntime licenses for the application can be purchased that use the smaller tag count size.• With any runtime license, one Web Thin Client Session is supported. If additional concurrent Web Thin ClientSessions are required, they must be licensed separately.CEViewCEView is a license-limited version of InduSoft Web Studio targeted for developers who will only use IWS to developWindows CE-based applications. With CEView, the following features apply:• All development is done on a Windows XP, 2000, Server 2003, Vista or Windows NT-based PC• Applications run on Windows CE-based HMIs (or devices). CEView supports a wide range of Windows CEplatforms, including x-86, XScale, ARM, MIPS and SH3/SH4 processor architectures.• CEView licenses can be purchased as development licenses or runtime-only licenses- A development license includes both the development (engineering) license and one runtime license.- The development (engineering) and runtime licenses must use separate license keys. The WindowsCE runtime license must be SoftKey license-based only. The development (engineering) license canbe either hardkey (USB or Parallel Port) or SoftKey based.- Without a runtime license key, a runtime license will only work for 2 hours before automaticallyshutting down (demo mode).• CEView is licensed based on the maximum number of tags supported. (see Figure 2-1 for tag size versions).Based on the development license version purchased, a specifed number of concurrent drivers will besupported.• Runtime applications can be developed using up to the maximum number of tags supported by thedevelopment (engineering) license. If the runtime can use a smaller tag count license version, then additionalruntime licenses for the application can be purchased that use the smaller tag count size.• With any runtime license, one Web Thin Client Session is supported. If additional concurrent Web Thin ClientSessions are required, they must be licensed separately.InduSoft Web Studio 3–1