IWS_Training_Guide_v.. - FF-Automation

The Licensing Process for IWS SoftwareIWS Training GuideNote: If you selected Network IP, you must enter the IP address of the Target Station. If you selectedSerial Port, you must set the Serial Port number and any advanced settings When the Connect button becomes active, click on the button to connect to the Windows CE device.When the development station is properly connected to the remote Windows CE device (TargetStation), the Status Field will display “Connected”.Note:CEServer.exe must be properly installed and running on the Target Station in order to properlyconnect. Click on the CE License tab If the Windows CE device has previously been licensed, the License Settings Fields will be populatedwith information about the type of license installed in the Windows CE device. If the Windows CEdevice has not previously been licensed, the Execution Environment dialog box will be shown asbelow.InduSoft Web Studio 4–13