WAREMA external venetian blinds with crank and motor operation ...

More documents

Recommendations

Info

Care/maintenance• Clean the product regularly (see "Cleaning procedure"table). To do so, lower the external venetianblind.Cleaning procedureClean the surfaces with a suitable cleaningagent.Remove dirt or objects from the product.• Clean the guide rod (for top-mounted external venetianblind for new buildings and venetian blindwindow systems) and light well cover (for A5) withlubricant for plastics.• Check the operating elements, lifting tapes andguiding nipples for visible wear and damage.• Check the installation substructure for damage.• Check that the external venetian blind is functioningproperly. Watch the product as it travels the fullrange of movement and look out for any unusualbehaviour or noises.• Have any damage repaired by a qualified specialistas soon as possible.4.2 Maintenance instructionsThe product must be maintained regularly orat least once a year.Inspection and maintenance work is only tobe carried out by an appropriately qualifiedspecialist. We recommend you take out amaintenance agreement with a qualified specialist.The WAREMA warranty becomes invalid ifthe unit is not cleaned properly at least oncea year.DANGERRisk of injury through irregular maintenance!• Check the product regularly for signs ofwear and damage, e.g. on the motor line.• Do not use products in need of repair. Inthis case, move the products to the upperlimit position and take them out of service.DANGERElectric shock!When inspecting or maintaining electricalparts, the unit must be de-energised andlocked out.• Check the product for visible wear, for damage to themotor line and to ensure it is securely attached (e.g.check that the screws have a firm hold).• Ensure that it is functioning properly and check theswitch-off points of the blind.• Check the lifting tapes, guiding nipples and cables forwear or damage.• Check that the guide elements are firmly seated andthe cable guidance is taut.• The battery needs to be changed in systems with aradio remote control.• Inform the operator of operating risks (e.g. ice formation).[B866096_6] - EN / 01.08.12 Page 12 of 20 Subject to change without notice
Care/maintenance/warrantyDANGERFunctional problems and product damage dueto incorrect operation in frosty conditions! Theexternal venetian blind can freeze up belowthe specified temperature (+ 3 °C).• Do not operate frozen external venetianblinds.• Avoid using force to operate frozen externalvenetian blinds. This may damage theblinds.• In cold temperatures, retract the externalvenetian blinds to the upper limit positionand take them out of service.• We recommend the use of an ice monitoringsystem.5 WarrantySubject to the statutory period of limitation for warrantyclaims. This requires regular maintenance. The warrantydoes not include wear parts or optical changes in line withthe type of material used (e.g. bleaching of surfacescaused by UV rays).Wear parts are Gear Crank, crank rod Bearing Lifting tape Tilting tapeFig. 2:Attaching the labeldd200001045[B866096_6] - EN / 01.08.12 Page 13 of 20 Subject to change without notice
Page 1 and 2: WAREMA external venetian blindswith
Page 3 and 4: Introduction1 Introduction1.1 Infor
Page 5 and 6: Product information2 Product inform
Page 7 and 8: Operation3 Operation NOTEOnly opera
Page 9 and 10: Operation3.3 Operation using the ce
Page 11: Care/maintenance4 Care/maintenanceG
Page 15 and 16: Troubleshooting8 TroubleshootingCAU
Page 17 and 18: EC Declaration of Conformity9 EC De
Page 19 and 20: [B866096_6] - EN / 01.08.12 Page 19

WAREMA external venetian blinds with crank and motor operation ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?