WAREMA external venetian blinds with crank and motor operation ...

Product information2.4 Wind speed limitsFor external venetian blinds, the use of wind speed limits(see Tab. 2) is recommended depending on the producttype. If the wind speed limits are reached, the unit mustbe raised. It is recommended that the wind monitors beset to the lowest value, e.g. to 13.5 m/s for Beaufort 7.Basis of Table 2: Slat facade distance: 100 mm Slat thickness: 0.4 mm Unit height: < 2400 mmDetails inm/s (Beaufortin brackets)Width up to1500 mmWidth up to2000 mmWidth up to2500 mmWidth up to3000 mmWidth up to4000 mmWidth up to5000 mmTab. 2:Beaded slat withrail guidance13.5 – 17.4(7)13.5 – 17.4(7)13.5 – 17.4(7)13.5 – 17.4(7)10.5 – 13.4(6)10.5 – 13.4(6)Flat slat with railguidance13.5 – 17.4(7)10.5 – 13.4(6)10.5 – 13.4(6)10.5 – 13.4(6)7.5 – 10.4(5)7.5 – 10.4(5)Recommended wind speed limitsBeaded slat withcable guidance13.5 – 17.4(7)13.5 – 17.4(7)10.5 – 13.4(6)10.5 – 13.4(6)10.5 – 13.4(6)10.5 – 13.4(6)Flat slat with cableguidance13.5 – 17.4(7)10.5 – 13.4(6)10.5 – 13.4(6)10.5 – 13.4(6)7.5 – 10.4(5)7.5 – 10.4(5)The table values (Beaufort level) should be modified in thefollowing cases:2.5 CE conformityCE conformity is certified, and the corresponding EC declarationof conformity (see Chapter 9/p. 17) is part of theseproduct-specific operating and maintenanceinstructions. In order to maintain this condition and ensuresafe operation and maintenance, you are obliged to observethe operating and maintenance instructions.Name: WAREMA Renkhoff SEYear of declaration of conformity: 2006Head office: Hans-Wilhelm-Renkhoff-Straße 297828 MarktheidenfeldGermanyStandard: DIN EN 13659 2Product: External venetian blindsIntended use:For outdoor installationWind class: 0 3Noise emission level: < 70 dB(A) 42For interior installation with motor operation, theproduct is declared to conform withDIN EN 60335-2-97.3Specification of wind class 0, since standard teststands cannot be used in the applicable test standarddue to mechanical inadequacies of the testdescription. Depending on the design and the installationlocation, the product can be used up to thewind speed limits specified above (Tab. 2).4For a standard installation of the product, the noiseemission level is < 70 dB(A). This value may varydepending on the installation.1. Facade distance > 100 to 300 mm: Reduce value by 1 > 300 to 500 mm: Reduce value by 2 > 500 mm: Table does not apply2. Material thickness < 0.4 mm: Reduce value by 13. Height-dependent with cable guidance 2400 to 4000 mm: Reduce value by 1 > 4000 mm: Reduce value by 24. Slat width 150 mm: Reduce value by 1The external venetian blinds will only meet the requirementsof the stated wind speed limits when mounted if:the recommended number of brackets, holder andguides are mountedthe instructions from the manufacturers for the dowelsare followedWhen mounting on wood, a wind speed limit cannot begiven due to the variability of this building material.[B866096_6] - EN / 01.08.12 Page 6 of 20 Subject to change without notice