WAREMA external venetian blinds with crank and motor operation ...

EC Declaration of Conformity9 EC Declaration of ConformityEC Declaration of ConformityThe product:WAREMA external venetian blindType: C/E 60/80 A2/A6 (TLT/AS)C/E 60/80/100/150 AF A6 (TLT/AS)C/E 50/60/80/100/150 AF (TLT/AS)C/E 73/90/93 A6(TLT/AS)C/E 90 A5(TLT/AS)C/E 50 A1/A2(TLT)Purpose:Also valid for use in top-mounted external venetian blinds for new buildingsAlso valid for use in venetian blind window systemsAlso valid for use in venetian blind facade systemsAlso valid for top rail installation on guide railsAlso valid for cover panels mounted on/between guide railsExternal sun shading systemMeets all pertinent provisions of the Construction Products Directive 89/106/EEC and, in the case of motordrives, the provisions of Machinery Directive 2006/42/EC.In particular, the following harmonised standards were used:DIN EN 13659Shutters - Performance requirements including safetyAdditionally for motor drive.DIN EN 60335-2-97 Household and similar electrical appliances - Safety - Part 2-97: Particular requirementsfor drives for rolling shutters, awnings, blinds and similar equipmentThe safety objectives of Low Voltage Directive 2006/95/EC were guaranteed according to Appendix I No. 1.5.1.of Directive 2006/42/EC.Person in charge of the compilation of the technical documents: Ralf Simon; for address, see manufacturer.Manufacturer:WAREMA Renkhoff SEHans-Wilhelm-Renkhoff-Str. 297828 MarktheidenfeldGermanyHarald FreundExecutive Vice President OperationsRalf SimonHead of Research and DevelopmentMarktheidenfeld, June 2011[B866096_6] - EN / 01.08.12 Page 17 of 20 Subject to change without notice