Cinema Cover - Audio Design Associates

DSS Receiver Connection - Coaxial Connection
2
1
L
R
4
2
6
3
L
8
4
2
5
L
R
R
AUDIO INPUTS
OSD
"Dolby", "Pro Logic", & the double-D Symbol are trademarks of Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,764, 5,974,380, 5,978,762 and other worldwide
patents issued and pending. "DTS", "DTS-ES Extended Surround", and "Neo 6" are trademarks of Digital Theater Systems, Inc. ' 1996,
2000 Digital Theater Systems, Inc. All rights reserved.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; and/or 5,222,059. European patent number
0323830. Other U.S. and foreign patents pending. Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm Ltd. Surround
EX is a jointly developed technology of THX and Dolby Laboratories, Inc., and is a trademark of Dolby. Used under authorization.
/ /
/ /
/
/ /
/ /
/ /
VGA¥RGB¥HDTV OUTPUT
PROCESSED VGA ONLY
COMPOSITE & S-VIDEO
ARE UP-CONVERTED &
1
VGA¥RGBHV¥HDTV INPUTS
2 3 4
VGASWITCHER
AC VOLTAGE
115V~2/10 A.S.B.
230V~1/10 A.S.B.
LINE-DOUBLED
115V~60Hz/230V~50Hz
PIN +/- CHAN PIN +/- CHAN
VIDEO INPUTS
3 5 7
VIDEO OUT
1 REC
1 14 LT 7 20 SBL 8 CHANNEL DB-25 INPUT
2 15 CT 8 21 SBR
3 16 RT 9 /10/22 SHLD
4 17 SB 11 23 R.T.A
5 18 SL 12 24 R.T.B 2
6 19 SR 13 25 R.T.C
MULTI-PIN LFE SUM
13 1 PIN
25 14
POINTS COMPONENT VIDEO
Y PB/B-Y PR/R-Y Y PB/B-Y PR/R-Y
RECORD
OUT
0dB
+10dB
MAIN REC
S-VIDEO INPUTS
1 2 3 4
1
3
OUTPUT
L
21
Digital
Audio Out
Video
Out
Video Cable
(When driving the TV with
S-Video or component
video, this cable is still
required to drive the Cinema
Reference’s LCD display.
Coaxial Digital Interconnect
6
L
7 8
R
S-Video
Output
SBL LS
SBR
DSS/SATELLITE
S-Video Cable
(Primary Video)
RS
MAIN
L
R
2
C
SUB
2
Y PB PR
DIGITAL AUDIO
INPUTS
OPTICAL INPUTS
1 3
1 2 3
2
4
4 GND OUT IN 12VDC
2
R
HD VGA Output
115 V
DATA PORT 12VDC OUT
Serial Data 100mA Max Per
ADA Bus¤ DC 1 DC 2
1 2 3 4 1- 2+ 1- 2+
ADA NET“
HDTV Video (Optional)
(You must connect this
cable to a TV, linedoubler,
or projector that
is capable of processing
HDTV (VGA) video)
CINEMA REFERENCE MACH II
HOME THEATER CONTROLLER
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
WARNING!
Risk Of Hazardous Energy! Make Proper Connections.
AVERTISSEMENT!
Energie Electrique Dangereuse! Faire Des Connexions Propres
Pour L’Hautparleur. Voir La Notice De Fonctionnement.
CAUTION: Disconnect Supply Cord Before Servicing.
ATTENTION: Debrancher Avant Le Depannage.
Voltage
Selector &
Safety Fuse
On This
Side
115 V
115V 230V
Use Same
AC OUTPUT AC INPUT Value Fuse
115V~1AS.B.
10A~ Max Switched 115V~60Hz/230V~50Hz 230V~.5AS.B.
In the event that the DSS receiver features a coaxial digital audio output which you intend to use
instead of the TOS-Link output, you will need to connect a 75Ω interconnect to Digital Input #2. When
doing this, you will also need to change the audio jack assigned to the DSS input label. To do this:
1 Turn the input knob until display’s second line reads DSS 2 and then press the Input knob.
2 Turn the Mode knob clockwise until the display’s second line reads SETUP MENU and press
the Mode knob.
3 Turn the Mode knob clockwise until the display’s second line reads AUDIO INPUTS and press
the Mode knob.
4 Turn the Mode knob clockwise until the display’s second line reads DIGITAL 2.
At this time, you have reassigned the DSS 2 input label from tracking the Optical 2 input to the Digital
2 input.
Please note that regardless of which wiring option you choose to use when connecting a DSS
receiver to the Cinema Reference Mach II, you may still need to make adjustments to the DSS
receiver. As many DSS receivers have multiple audio output setup configurations, ADA strongly
suggests reviewing the DSS manual to insure proper setup.
Page 15