Cinema Cover - Audio Design Associates

More documents

Recommendations

Info

Power On, Mute, O f, & Master Volume Control When the Cinema Reference is off, turning any knob or pushing any knob other than the Volume knob will cause the Cinema Reference’s center LCD display to indicate: PUSH VOLUME FOR POWER ON To turn on the Cinema Reference, providing the unit is not in Mute, press the Volume knob once. Pressing of the Volume knob performs only three functions. If the unit is off, pressing it will turn it on. If the unit is on, pressing it once will engage Mute. If the unit is in Mute, pressing it again will turn it off. (To regain the audio (exit Mute), turn the Volume knob). Lower & Raise Volume VOLUME Once the Cinema Reference is on, turning the Volume knob will only raise or lower the system’s volume level. This is considered the Master Volume Control as it will adjust all eight channels of volume, maintaining the balance of levels that are preset between channels. Power On Press the Cinema Reference’s Volume knob to engage power on. Press Knob To Turn On Press Knob Once To Mute Press Knob Twice For Off Front Plate Side View Chassis Side Mute While the Cinema Reference is on, pressing it’s Volume knob once will mute all channels. Power Off While the Cinema Reference is in Mute, pressing the Volume knob a second time will turn the Cinema Reference off. Un-Mute While the Cinema Reference is in Mute, turning the volume knob, will regain audio. Power On/Off Via AC Control If the Cinema Reference is on when it is unplugged or when power is removed through the use of an AC Controller, it will also automatically turn back on when power is restored. Page 7
Input Selector Page 8 Component Turn To Select Another INPUT Front View 1. Dial In New Input Turn the Input Selector knob until the second line of the LCD display reads the component you wish to select. As you turn the knob, you will notice that the top line of the display still indicates the current source in play. Also, this component is still being routed and processed by the Cinema Reference. 2. Engage New Input Once the second line of the display indicates the next component you wish to access, press the Input Selector knob to engage this input. This method permits you to select an input without switching all of the inputs you are scrolling through. Press Knob To Activate The New Component Selection The Cinema Reference Mach II permits you to scroll to the next input without having all of the components you are passing actively process through the Cinema Reference Mach II. This prevents the clicking that is commonly associated with changing TV channels up and down. To best access another component from the front of the Cinema Reference, turn the Input Selector knob. As you turn this knob, you will notice that the top row of the LCD display will not change, still indicating the current component in use (in this example, DVD PLAYER 1). The second line of the LCD display will advance through the input names until the desired component is displayed. Front Plate Side View DVD PLAYER 1 ALL -24.0 DB DVD PLAYER 1 DSS 2 Chassis Side DVD PLAYER 1 DVR/PVR 3 DVD PLAYER 1 VCR 4 DVD PLAYER 1 CABLE/TV 5 Once the desired component is displayed on the LCD’s second row, press the Input Selector knob to engage that component. The display will then return to read the new selection (i.e. DSS) along with the Volume Level. CABLE/TV 5 ALL -24.0 DB
Page 1 and 2: CINEMA RELEASED APRIL 2002 REFERENC
Page 3 and 4: Page 2 Contents Safety Instructions
Page 5 and 6: AC Connections AC Connection Before
Page 7: Introduction - Front Panel Controls
Page 11 and 12: Rear Panel Connections Composite Vi
Page 13 and 14: DVD Player Connection The Out of th
Page 15 and 16: DSS Receiver Connection The Out of
Page 17 and 18: DVR/PVR Connection The Out of the B
Page 19 and 20: VCR Connection The Out of the Box i
Page 21 and 22: CD Player Connection The Out of the
Page 23 and 24: Tuner (Radio) Connection The Out of
Page 25 and 26: Video Game Connection The Out of th
Page 27 and 28: Laserdisc Player with Internal RF D
Page 29 and 30: Theater (Main) Video Connections To
Page 31 and 32: Recording Output The Cinema Referen
Page 33 and 34: CD Player Analog Record Connection
Page 35 and 36: Custom Input Configuration The Cine
Page 37 and 38: To enter the Label Inputs setup mod
Page 39 and 40: 20 Turn the Mode knob counterclockw
Page 41 and 42: S-Video Input Configuration As with
Page 43 and 44: 3 Turn the Mode knob clockwise unti
Page 45 and 46: LCD Preview Display The Cinema Refe
Page 47 and 48: c When trying to decide what type o
Page 49 and 50: Multi-Pin Speaker Setup The Cinema
Page 51 and 52: Speaker Level Setup 2 The Cinema Re
Page 53 and 54: Balance Presets The Cinema Referenc
Page 55 and 56: To proceed, you will first determin
Page 57 and 58: THX Ultra Setup 5 The Cinema Refere
Page 59 and 60:
Tone Controls In a perfectly acoust
Page 61 and 62:
Speaker Groups In this section, we
Page 63 and 64:
11 Turn the Channel knob one click
Page 65 and 66:
2 Turn the Mode knob clockwise unti
Page 67 and 68:
RS-232 Control Options The Cinema R
Page 69 and 70:
IRT-232 IR Transceiver to RS-232 Wi
Page 71 and 72:
IRR-5000 IR Receiver The IRR-5000 i
Page 73 and 74:
IR Transceiver (Front Panel) Settin
Page 75 and 76:
Output Channel Indicator Lamps The
Page 77 and 78:
Multi-Channel Formats Dolby Digital
Page 79 and 80:
Dolby Digital 5.1 Discrete + EX/ES
Page 81 and 82:
Two Channel Modes & Indicator Lamps
Page 83 and 84:
4 Turn the Mode knob one click so t
Page 85 and 86:
11 Turn the Mode knob one click so
Page 87 and 88:
MONO ENH - Mono Enhance is a propri
Page 89 and 90:
Dolby Digital 5.1 Stereo Downmix Do
Page 91 and 92:
Adaptive Decorrelation - In a movie
Page 93 and 94:
Default Modes The Cinema Reference
Page 95 and 96:
User Modes The Cinema Reference Mac
Page 97 and 98:
Appendix A - Out Of The Box Setting
Page 99 and 100:
Appendix C - Resetting Factory Defa
Page 101 and 102:
Appendix E - Cinema Reference Mach
Page 103 and 104:
Under the Mode Selection sub-tab, y
Page 105 and 106:
Under the Tones sub-tab, there are
Page 107 and 108:
Under the 4-Bass tab, you can set t
Page 109 and 110:
Page 108 vol - master-up @ 0.5db FF
Page 111 and 112:
Page 110 update - PII music and PII
Page 113:
The chart below indicates all possi
show all

Cinema Cover - Audio Design Associates

Create successful ePaper yourself

Delete template?

Save as template?