Cinema Cover - Audio Design Associates

DVR/PVR with Digtial Audio & VGA Video Connection
The Out of the Box input configuration for a DVR provides for analog audio connections. This configuration,
in addition to composite video and S-Video, is also setup for VGA video. As such, if you are
using an advanced DVR, one that also features a VGA video output (i.e. replay tv 4000), you can
connect this output to the Cinema Reference’s #3 VGA input. As with other components that feature
a VGA output, this connection is only useful if your display device features a VGA/HDTV input.
1
2
1
L
R
Stereo
Audio Out
R L
4
2
6
3
L
8
4
2
5
L
R
R
AUDIO INPUTS
DVR/PVR with Digital Audio & VGA Video
Opitcal Digital
Audio Out
Video Cable
(This cable is required to
drive the LCD display.)
OSD
6
L
7 8
R
Video
Out
"Dolby", "Pro Logic", & the double-D Symbol are trademarks of Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,764, 5,974,380, 5,978,762 and other worldwide
patents issued and pending. "DTS", "DTS-ES Extended Surround", and "Neo 6" are trademarks of Digital Theater Systems, Inc. ' 1996,
2000 Digital Theater Systems, Inc. All rights reserved.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; and/or 5,222,059. European patent number
0323830. Other U.S. and foreign patents pending. Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm Ltd. Surround
EX is a jointly developed technology of THX and Dolby Laboratories, Inc., and is a trademark of Dolby. Used under authorization.
SBL LS
SBR
RS
MAIN
L
R
S-Video
Output
/ /
/ /
/
/ /
/ /
/ /
3
VGA¥RGB¥HDTV OUTPUT
PROCESSED
COMPOSITE & S-VIDEO
ARE UP-CONVERTED &
LINE-DOUBLED
VGA ONLY
1
VGA¥RGBHV¥HDTV INPUTS
2 3 4
VGASWITCHER 115V~2/10 A.S.B.
AC VOLTAGE 230V~1/10 A.S.B.
115V~60Hz/230V~50Hz
PIN +/- CHAN PIN +/- CHAN
VIDEO INPUTS
3 5 7
VIDEO OUT
1 REC
1 14 LT 7 20 SBL 8 CHANNEL DB-25 INPUT
2 15 CT 8 21 SBR
3 16 RT 9 /10/22 SHLD
4 17 SB 11 23 R.T.A
5 18 SL 12 24 R.T.B 3
6 19 SR 13 25 R.T.C
MULTI-PIN LFE SUM
13 1 PIN
25 14
POINTS COMPONENT VIDEO
Y PB/B-Y PR/R-Y Y PB/B-Y PR/R-Y
RECORD
OUT
0dB
+10dB
MAIN REC
S-VIDEO INPUTS
1 2 3 4
1
3
OUTPUT
L
2
Y PB PR
DIGITAL AUDIO
INPUTS
OPTICAL INPUTS
1 3
Please note that when using a TOS-Link interconnect, ADA strongly suggests using the very
best interconnect available to prevent audio dropouts.
Page 17
C
SUB
S-Video Cable
(Primary Video)
1 2 3
3
3
4 GND OUT IN 12VDC
2
HD VGA Output
HDTV Video (Optional)
4
R
115 V
ADA NET“
DATA PORT 12VDC OUT
Serial Data 100mA Max Per
ADA Bus¤ DC 1 DC 2
1 2 3 4 1- 2+ 1- 2+
CINEMA REFERENCE MACH II
HOME THEATER CONTROLLER
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
WARNING!
Risk Of Hazardous Energy! Make Proper Connections.
AVERTISSEMENT!
Energie Electrique Dangereuse! Faire Des Connexions Propres
Pour L’Hautparleur. Voir La Notice De Fonctionnement.
CAUTION: Disconnect Supply Cord Before Servicing.
ATTENTION: Debrancher Avant Le Depannage.
Voltage
Selector &
Safety Fuse
On This
Side
115 V
115V 230V
Use Same
AC OUTPUT AC INPUT Value Fuse
115V~1AS.B.
10A~ Max Switched 115V~60Hz/230V~50Hz 230V~.5AS.B.
Regardless of whether your display device features a VGA/HDTV input, the advanced DVRs also
offer a digital audio output that will improve your entertainment experience. Because the Out of the
Box configuration defaults to the Analog 3 input, you will first need to reassign the DVR/PVR input
label to a digital audio jack. At the time of this printing, advanced DVRs feature a TOS-Link optical
digital connection which should be connected to the Cinema Reference Mach II’s Optical Input #3. To
reassign the DVR/PVR input label to track the digital input, follow the steps below.
1 Turn the input knob until display’s second line reads DVR/PVR 3 and then press the Input
knob.
2 Turn the Mode knob clockwise until the display’s second line reads SETUP MENU and press
the Mode knob.
3 Turn the Mode knob clockwise until the display’s second line reads AUDIO INPUTS and press
the Mode knob.
4 Turn the Mode knob counterclockwise until the display’s second line reads OPTICAL 3.
At this time, you have reassigned the DVR/PVR 3 input label from tracking the Analog 3 input to the
Optical 3 input.