IQ plus 810 - Rice Lake Weighing Systems

6.1 MENU DESCRIPTIONS (CONTINUED)FORMAT MENU DESCRIPTIONS (Defaults in Bold Type with √)NAME DESCRIPTIONCHOICES(PRIMARY)DSP DIVDEC PNTUNITS(SECNDRY)DSP DIVDEC PNTUNITSMULTDisplay Divisions. Selects the value of the minimum division size ofthe displayed weight.Decimal Point Location. Determines the location of the decimal pointor dummy zeros in the display. Value should be consistent with legalrequirements locally.Units. Specifies the units for displayed and printed weight. GR is theabbreviation for Grains, G is for Grams.Display Divisions. Selects the value of the minimum division size ofthe displayed weight.Decimal Point Location. Determines the location of the decimal pointor dummy zeros in the display. Value should be consistent with legalrequirements locally.Units. Specifies the units for displayed and printed weight. GR is theabbreviation for Grains, G is for Grams.Multiplier. This is the conversion factor by which the primary units aremultiplied by to obtain the secondary units. The default is 0.453592,which is the conversion factor to change pounds to kilograms. Totoggle between Primary and Secondary units, press the UNITS key.1√ 2 58888888√888888.8 88.8888888888.88 8.8888888888.888 8888800888.8888 8888880LB√ OZTN GRG KG1 2 5√8888888888888.8√ 88.8888888888.88 8.8888888888.888 8888800888.8888 8888880LB OZTN GRG KG√0.453592√Enter other choicesvia the keyboard.(RATECHG)DSP DIVDEC PNTMULTDisplay Divisions. Selects the value of the minimum division size ofthe displayed weight.Decimal Point Location. Determines the location of the decimal pointor dummy zeros in the display.Multiplier. This is the conversion factor by which the primary units aremultiplied by to obtain the Rate of Change units. The default is1.0000.1√ 2 58888888√888888.8 88.8888888888.88 8.8888888888.888 8888800888.8888 88888801.0000√Enter other choicesvia the keyboard.TIMETime. This sets the time units for the Rate of Change function.SEC√MIN6 - 21