IQ plus 810 - Rice Lake Weighing Systems

6.1 MENU DESCRIPTIONS (CONTINUED)SETPOINT MENU DESCRIPTIONS (Defaults in BoldType with √)NAMEDESCRIPTIONCHOICES(Level 1)SETPNTS(Level 2)BATCHNGSetpoints. This parameter choice begins the individual setpointnumber menus. Beneath each of the level 2 selections (SETPNT 1 toSETPNT 16) will be found the lower level choices to configure eachof the individual setpoints.Batching Enable. If MANUAL or AUTO is selected, this allows abatching sequence to be run. This parameter serves as a softwaresafety lockout for establishing a batch sequence. If this parameter isOFF, no individual setpoints can be assigned as batch steps.OFF√STPT 1toSTPT 16BATCHNGOFF√MANUALAUTO(Level 3)GROSSSPNET SP+REL SP-REL SP%REL SPPAUSEDELAYGross Setpoint. The setpoint value will be a gross weight.Net Setpoint. The setpoint value will be a net weight.Positive Relative Setpoint. The setpoint value will be added to aprevious specified setpoint to arrive at this value.Negative Relative Setpoint. The setpoint value will be subtractedfrom a previous specified setpoint to arrive at this value.Percentile Relative Setpoint. The setpoint value will be a percentagevalue of a previous specified setpoint.Pause the batching sequence while the selected action is performed.This choice automatically makes the setpoint part of a valid batchingsequence if one has been established.Delay the batching sequence for a specified time (units in 0.1 sec)while the selected action is performed. This choice automaticallymakes the setpoint part of a valid batching sequence if one has beenestablished.XXXXXX Entervalue with keyboard.XXXXXX Entervalue with keyboard.RELNUM (selectprevious setpoint thatthis one relates too)SP 1√PSHTAREPSHPRNT ALARMPSHACCM DIGOUTXXXXXX PSHTAREPSHPRNT ALARMPSHACCM DIGOUTWAIT SS Wait Until Standstill ( ) is achieved before the selected actionis performed. This choice automatically makes the setpoint part of avalid batching sequence if one has been established.SOURCE, plus thefive choices above.COUNTEREstablishes the number of identical batch sequences to be run.When the specified number of sequences has been run, the sequencewill pause until the BATCH START digital input is pushed.This choice automatically makes the setpoint part of a valid batchingsequence if one has been established.Enter number ofbatches desired.DIGOUT 1-16(default matchessetpoint #)AUTOJOGAutomatically Jog The Previous Operation. This checkweighs theprior NET SP, GROSS SP, or REL SP setpoint operation to be certainits value is true in the standstill condition. If the prior setpoint value isnot true in standstill, the prior operation will jog ON for a selected timevalue period (units in 0.1 sec), or until the prior setpoint value is met.This sequence repeats until the prior setpoint is met in standstill.XXXXXX Enter JogTime with keyboard.Select which digitaloutput to use to jogprior operation6 - 23