11.07.2015 Views

Prestige Trimax Solo 60175250399 install manual - Coastal Winair

Prestige Trimax Solo 60175250399 install manual - Coastal Winair

Prestige Trimax Solo 60175250399 install manual - Coastal Winair

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Unit PreparationsSECTION III - Unit PreparationsHandling InstructionsThe PRESTIGE <strong>Solo</strong> is generally easier tohandle and maneuver once removed from theshipping carton.To remove the shipping carton:CAUTIONUse care not to drop, bump or rotate theboiler upside down, as damage to theboiler will result.1. Remove any shipping straps and open theside of the shipping carton.2. Slide the unit with the foam inserts out ofthe carton.3. Discard all packing materials.Wall Mounting InstallationThe PRESTIGE <strong>Solo</strong> should be wall mountedusing the bracket provided with the boiler. ThePRESTIGE <strong>Solo</strong> is not designed for floor<strong>install</strong>ation. If floor <strong>install</strong>ation is required anoptional floor stand is available throughTriangle Tube.NOTICEThe wall used for mounting the PRES-TIGE <strong>Solo</strong> must be vertically plumbedand capable of supporting a minimum130 pounds [59 kg] for the PRESTIGE<strong>Solo</strong> 60, 175 pounds [80 kg] for PRES-TIGE <strong>Solo</strong> 175/250 and 250 pounds [115Kg] for PRESTIGE <strong>Solo</strong> 399. Failure tocomply with these requirements couldresult in personal injury, death or substantialproperty damage.Wall Mounting Guidelines1. The wall-mounting bracket is designed forstud spacing of 12 inch or 16 inch on centers.For unconventional stud spacing, asolid / secure mounting surface must beprovided for <strong>install</strong>ation of the bracket.2. For applications using wood studs, <strong>install</strong>the bracket using the lag screws providedwith the boiler. Ensure both lag screws are<strong>install</strong>ed securely in the studs.3. For applications using metal studs, <strong>install</strong>the bracket to the studs using 3/16” togglebolts and washers.4. DO NOT mount or attempt to mount thewall bracket to hollow sheet rock or lathwalls using anchors. Only <strong>install</strong> boiler tostuds or equivalent wood structure.5. For applications using solid walls (rock,concrete, brick, cinder block, etc.), <strong>install</strong>the wall bracket using anchors (doubleexpansion shields) and bolts with washersprovided with the boiler.6. The boiler is too heavy and bulky for a singleperson to lift and attempt to mount; aminimum of 2 people is required formounting the boiler.NOTICEUse extreme care not to drop the boileror cause bodily injury while lifting ormounting the boiler onto the bracket.Once mounted verify that the boiler issecurely attached to the bracket andwall. Failure to comply with the aboveguidelines could result in property damage,personal injury or death.12

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!