Prestige Trimax Solo 60175250399 install manual - Coastal Winair

TriMax OperationHome ScreenThe Home Screen presents status information in a very user friendly way so that the currentstate of the boiler can be quickly accessed.The Prestige is represented in the center of the Home Screen. Basic operatinginformation such as supply and return temperatures are displayed as well ascurrent burner status. A flame symbol is displayed when the unit is fired. Theflame size changes to indicate the current firing rate.The radiator icon indicates that acentral heating call has been received.A small number 1 or 2 indicateswhich CH calls are active.The faucet icon indicates that adomestic hot water call has beenreceived.The percentage icon indicates thatan external modulation call hasbeen received.12Circulator icons indicate whichcirculators are currently powered.This line provides basic information.The user can press the LEFT or RIGHTarrow buttons to view Target, Supply,Return, Domestic and OutdoorTemperatures.The status line displays the current operating state of the Prestige.See page 44 for a list of all Status Line Messages.The screen backlight will illuminate when any button is pressed and remain illuminated for fiveminutes. Press the UP or DOWN buttons to turn on the backlight while at the Home Screenwithout making any changes.The screen contrast can be adjusted at the Home Screen by pressing and holding the OK buttonthen pressing and holding the LEFT arrow along with the OK button. The contrast canthen be increased by pressing the UP button or decreased by pressing the DOWN button whileholding in the OK button and LEFT arrow. All buttons must be released and the procedureperformed again to switch between increasing and decreasing contrast.43