KMD-201AA KMD-201AWA - Hoshizaki

f) Freeze Timer (S1 dip switch 9 & 10)The freeze timer setting determines the maximum allowed freeze time to prevent possiblefreeze-up issues. Upon termination of freeze timer, machine initiates the harvest cycle. After2 consecutive timer terminations, machine will shut down, possibly indicating a problem.The freeze timer is factory adjusted, and no adjustment is required.Time(50/60Hz)(minutes)60/6060/50100/70120/100g) Pump-Out Pump Motor Delay (S2 dip switch 1)The pump-out pump motor delay determines whether or not the pump motor de-energizesfor 2 seconds before restarting at the beginning of a drain cycle.The pump-out pump motor delay is factory adjusted and no adjustment is required.h) Refill Counter (S2 dip switch 2, 3, & 4)Do not adjust. These must be left in the factory default position or the unit will not operateproperly. The KMD-201AA and KMD-201AWA refill 1 time.i) Factory Use (S2 Dip Switch 5)Must remain off.j) Anti-Slush Control (S2 dip switch 6)The anti-slush control helps prevent slushing during the freeze cycle on small icemakers.It is deactivated on the KMD-201 series.When activated, the thermistor located on the suction line checks for a 34 ºF (1 ºC)temperature as the evaporator cools. When 34 ºF (1 ºC) is reached, a 5.9 kΩ signal causesthe control board to de-energize the pump motor for 10 seconds.Do not adjust. This must be left in the factory default position or the unit will not operateproperly.14