KMD-201AA KMD-201AWA - Hoshizaki
KMD-201AA KMD-201AWA - Hoshizaki
KMD-201AA KMD-201AWA - Hoshizaki
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2) Install the new Run Capacitor in the reverse order of the removal procedure.3) To prevent miswiring, check the terminal numbers and lead wire colors with the WiringLabel.[j] CAPACITOR FOR PUMP MOTOR1) Disconnect the Tab Terminals, remove the screw.2) Install the new Capacitor in the reverse order of the removal procedure.19. SPRAY TUBE, WATER SUPPLY TUBE, SPRAY GUIDE1) Turn off the power supply.2) Remove the panels and front insulation.3) Remove the Hose Band connecting the Hose.4) Push the Tabs on both sides of the Spray Tube to release the Spray Tube.5) Pull the Spray Tube towards you.TabsHose BandWater Supply Tube(under Spray Tube)Spray TubeHoseHose Band6) The Spray Tube is easily cleanable by removing the black rubber caps on the ends.7) Remove the Hose Band connecting the Water Supply Tube.8) Pull the Water Supply Tube towards you.9) Remove the Top Insulation.10) The Spray Guide is located under the Water Supply Tube. Pull off the Spray Guide fromthe Evaporator.48