MINUTES OF2ND RECONSTITUTED EXPERT APPRAISAL ...

More documents

Recommendations

Info

vi.vii.viii.ix.Risk and Disaster Management Plan along with the mitigation measures shall beprepared and a copy submitted to the Ministry’s Regional Office at Bangalore,APPCB and CPCB within 3 months of issue of environment clearance letter.As proposed, green belt shall be developed in 33 % of the plant area. Selectionof plant species shall be as per the CPCB guidelines in consultation with theDFO.All the commitments made to the public during the Public Hearing / PublicConsultation meeting held on 20 th September,2011 should be satisfactorilyimplemented and a separate budget for implementing the same should beallocated and information submitted to the Ministry’s Regional Office atBangalore.At least 5 % of the total cost of the project shall be earmarked towards theEnterprise Social Commitment based on Public Hearing issues and item-wisedetails along with time bound action plan should be prepared and submitted tothe Ministry’s Regional Office at Bangalore. Implementation of such programshould be ensured accordingly in a time bound manner.2.2.4. Ferro Alloy Plant (1x6 MVA Submerged Arc Furnace; 7,500 TPA of Fe-Mn & Si-Mn) at Jamuria Industrial Estate, Mouza Ikra, District Burdwan in West Bengalby M/s Gajanan Iron Private Limited - regarding EC.The project authorities and their consultant, M/s Global Experts, Bhubaneswar gavea detailed presentation on the salient features of the project and proposed environmentalprotection measures to be undertaken as per Terms of Reference (TORs) awardedduring the 25 th Meeting of the Expert Appraisal Committee (Industry-1) held during29.6.2011 – 30.6.2011 for preparation of EIA/EMP report. All the Ferro Alloy Plants arelisted at S.No. 3(a) in Primary Metallurgical Industries under category ‘A’ of the Scheduleof EIA Notification, 2006 and appraised by the Expert Appraisal Committee (Industry) ofMoEF.M/s Gajanan Iron Pvt. Ltd. have proposed for 1x6 MVA Submerged Electric ArcFurnace Ferro Alloy Plant for producing 7,500 TPA of Ferro Manganese and SilicoManganese at Jamuria Industrial Estate, Mouza-Ikra, District Burdwan, West Bengal.Total project area is 3.83 acres, which is allocated in the Jamuria Industrial Estate setupby ADDA (Asansol-Durgapur Development Authority) and green belt will be developed in1.28 acres. No National park/wildlife sanctuary is located within 10 km radius of theproject. The total project cost is Rs. 9.06 Crores and Rs. 36.20 lakhs & Rs. 1.81 lakhshas been allocated towards Capital Cost and recurring cost/annum for pollution controlmeasures. Expenditure on CSR will be Rs. 45.3 Lakhs (5 % of the total project cost in 5years). It was confirmed that no litigation/court case is pending against the project.Manganese Ore Lumps (16,500 TPA), Metallurgical Coke (4,600 TPA), Dolomite(2,500 TPA), Quartzite (1,900 TPA) and Electrode Paste (150 TPA) are the rawmaterials that will be used. Total power requirement of the unit will be 6.5 MW, whichwill be drawn from Damodar Valley Corporation. Ferro-alloys are manufactured inelectric operated submerged arc furnace. The manufacturing process of ferromanganese& silico-manganese is similar. The blending of raw materials is done by
mixing Manganese Ore, metallurgical Coke, Dolomite, Quartz etc. in requisite proportionto production of Fe-Mn or Si-Mn. Fe-Mn slag & quartz are added as raw material forsilico-manganese production. The blended raw materials are charged to the furnace withthe help of conveyors and charging chutes. In the furnace, carbon electrodes arepartially submerged in the charge, operated by hydraulic cylinder. The liquid metal alloyis tapped at regular intervals. Tap holes are provided at the bottom of the furnace fortaping both molten alloys and slag. The tap hole is opened by oxygen lancing pipe andafter tapping is completed, it is closed by clay plugs. Slag is collected in the slag dishand it is shifted with the help of EOT. After the product is cooled, it is off loaded from thecasting bed for breaking, cleaning and packing.The PM from SAF will be controlled by the installation of bag house with ID fanand stack. Fully covered conveyor belt with dry fog system will be used for conveying theraw material dust. Water sprinklers will be used for dust suppression. Base line data ofambient air quality monitored at eight locations indicates that concentrations of PM 10 ,PM 2.5 , SO 2 and NO x are varying from 32.1 µg/m 3 to 50.1 µg/m 3 , 10.2 µg/m 3 to 19.6µg/m 3 , 7.2 µg/m 3 to 10.9 µg/m 3 and 3.4 µg/m 3 to 9.7 µg/m 3 respectively. AAQ modellingstudy indicates that the maximum incremental GLCs after the proposed project would be14.09 µg/m 3 , 5.58 µg/m 3 and 1.18 µg/m 3 with respect to PM 10 , SO 2 and NO x respectively.The resultant concentrations are within the NAAQS.Total make up water requirement will be 30 m 3 /d and will be sourced from ADDAsupply. Rain water harvesting is also proposed. The wastewater generated will becollected and after treatment in units like settling ponds & clarifier, will be used for dustsuppression and greenbelt development. Domestic effluent will be treated in septic tankfollowed by soak pit. No effluent will be discharged out side premises and zerodischarge norms will be adopted. The Fe-Mn Slag will be fully utilized in Si-Mnproduction and Si-Mn slag will be sold to glass manufacturers. The fines and dust fromraw material handling will be used in the furnace. The used batteries/used oil/lubricantsare sold to hazardous waste authorized dealers.The Committee noted that no public hearing / consultation is required due toproject being located in notified industrial estate as per stage Section 7 (i), III Stage (3),Para (i)(b) of EIA Notification 2006. Environmental clearance was accorded to JamuriaIndustrial Estate on 6.11.2006.After detailed deliberations, the Committee found the EIA/EMP report adequateand suggested to stipulate following specific conditions along with other environmentalconditions while considering for accord of environmental clearance:1. No charcoal shall be used as fuel. Pet coke shall be used as fuel instead ofcharcoal from unknown sources.2. Continuous monitoring facilities for the process stacks and sufficient air pollutioncontrol equipments viz. fume extraction system with bag filters, ID fan and stackof adequate height to submerged arc furnace shall be provided to controlemissions below 50 mg/Nm 3 .3. The National Ambient Air Quality Standards issued by the Ministry vide G.S.R.No. 826(E) dated 16 th November, 2009 shall be followed.
Page 1: MINUTES OF2 ND RECONSTITUTED EXPERT
Page 4 and 5: 5. Regular monitoring of influent a
Page 6 and 7: The revised draft EIA/EMP report sh
Page 10 and 11: 4. Secondary fugitive emissions fro
Page 12 and 13: µg/m 3 , 6 µg/m 3 to 21.3 µg/m 3
Page 14 and 15: permission for drawl of 16 MGD of w
Page 16 and 17: Ministry’s Regional Office at Ban
Page 18 and 19: iv.Secondary fugitive emissions sha
Page 20 and 21: EIA/EMP. Leather/skin/hide processi
Page 22 and 23: By-products1 HCl 0 16.95 16.952 Amm
Page 24 and 25: y M/s K. P. R. Industries (India) L
Page 26 and 27: chlorine storage area shall be prov
Page 28 and 29: ii.Bag filter alongwith stack of ad
Page 30 and 31: Points Latitude LongitudeA 23 o 12
Page 32 and 33: authorization or membership of TSDF
Page 34 and 35: proposed expansion is Rs.1, 663 Cro
Page 36 and 37: These analysis should include trace
Page 38 and 39: 49. A note on the impact of drawl o
Page 40 and 41: a language other than English, an E
Page 42 and 43: eserved forests, wildlife sanctuari
Page 44 and 45: 37. Impact of the transport of the
Page 46 and 47: 66. Impact of the project on local
Page 48 and 49: project will be 56.51 MW, which wil
Page 50 and 51: 31. Sources of secondary emissions,
Page 52 and 53: 59. All stock piles will have to be
Page 54 and 55: Grain size analysis of quartziteRev
Page 56 and 57: 1. Measures shall be taken to mitig
Page 58 and 59:
On 17.6.2010, application was submi
Page 60 and 61:
6. Regular monitoring of influent a
Page 62 and 63:
2. Bag filter alongwith stack of ad
Page 64 and 65:
vii) All the solvent storage tanks
Page 66 and 67:
v) Total fresh water requirement fr
Page 68 and 69:
5. Cathodic protection shall be pro
Page 70 and 71:
SEIAA, Karnataka on 5.7.2011 after
Page 72 and 73:
35. Ground water monitoring minimum
Page 75 and 76:
2.4.8. Proposed Integrated Cement P
Page 77 and 78:
vii) As proposed, Industrial efflue
Page 79 and 80:
After detailed deliberations, the C
Page 81 and 82:
Solvent red 135Solvent red168Solven
Page 83 and 84:
556, 560, 561/1, Village Dudhwada,
Page 85 and 86:
22 nd March, 2012 for Anand distric
Page 87 and 88:
xviii. In case the commercial viabi
Page 89 and 90:
SPM (0.0308ug/m 3 ), HC (8.87ug/m 3
Page 91 and 92:
eneficial purposes. Domestic efflue
Page 93 and 94:
Distillery Units are listed at S.N.
Page 95 and 96:
during rainy season by flowing alon
Page 97 and 98:
i. Distillery unit should be based
Page 99 and 100:
Chemicals Industry (Bulk Drugs & In
Page 101 and 102:
vi)Trade effluent should be segrega
Page 103 and 104:
PM 10 (29 - 141 ug/m 3 ), NO x (10
Page 105 and 106:
xi.xii.xiii.xiv.i. In case the comm
Page 107 and 108:
2.5.14. Setting up of Di-methyl Sul
Page 109 and 110:
concerned Authority and a copy subm
Page 111 and 112:
viii. All the issues raised during
Page 113 and 114:
2.5.17. Manufacture of Phenol Forma
Page 115 and 116:
ix)Green belt should be developed i
Page 117 and 118:
v. The company should make the arra
Page 119 and 120:
xxvi.xxvii.Company should have own
Page 121 and 122:
xi.xii.xiii.xiv.vii.viii.ix.Treated
Page 123 and 124:
Water based drilling fluid will be
Page 125 and 126:
vii.viii.ix.The company should cons
Page 127 and 128:
awarded during the 18 th Meeting of
Page 129 and 130:
iii.iv.Water based drilling mud sho
Page 131 and 132:
‘Operator’ on 30.06.2010. Block
Page 133 and 134:
3 95 O 06’22.74” 10 O 01’46.6
Page 135 and 136:
25. Details of all environment and
Page 137 and 138:
In the NPK mixtures plant, Unit wil
Page 139 and 140:
41. Action plan for rainwater harve
Page 141 and 142:
composted with press mud. Fly ash o
Page 143 and 144:
42. What is the hierarchical system
Page 145 and 146:
12. Present land use based on satel
Page 147 and 148:
IA.II (I) dated 4 th August, 2009,
Page 149 and 150:
14. List of products alongwith the
Page 151 and 152:
iii. Authenticated English translat
Page 153 and 154:
27. Action plan to control ambient
Page 155 and 156:
2.5.30. Expansion of Synthetic Orga
Page 157 and 158:
16. List of products alongwith the
Page 159 and 160:
i. All documents shall be properly
Page 161 and 162:
24. Lagoon capacity for sugar unit
Page 163 and 164:
S.N. Product Capacity (MTPD)1 Urea
Page 165 and 166:
44. Socio-economic development acti
Page 167 and 168:
6. A map indicating location of the
Page 169 and 170:
(a) Does the company have a well la
Page 171 and 172:
13. Present land use based on satel
Page 173 and 174:
52. Any litigation pending against
Page 175 and 176:
12. Project site location alongwith
Page 177 and 178:
51. Public hearing to be conducted
Page 179 and 180:
20. Air pollution control measures
Page 181 and 182:
The Committee decided that the prop
Page 183 and 184:
31. Treatment of phenol in the effl
Page 185 and 186:
located outside the notified indust
Page 187 and 188:
Page 189 and 190:
11011/381/2006-IA II (I) dated 11 t
Page 191 and 192:
e ground water. Oily effluent will
Page 193 and 194:
xv.xvi..xvii.xviii.xix.xx.xxi.xxii.
Page 195 and 196:
with a capacity of 4.5 KL/day. No N
Page 197 and 198:
to 90 % and will be sold as cattle
Page 199 and 200:
xiv. Dedicated parking facility for
Page 201 and 202:
vii) As proposed, Industrial efflue
Page 203 and 204:
i) Ambient air quality data should
Page 205 and 206:
Discarded drums and empty bags will
Page 207 and 208:
project is PM (1.775 ug/m 3 ), SO 2
Page 209 and 210:
0.7Crores. No wildlife sanctuary/ r
Page 211 and 212:
The project authorities and their c
Page 213 and 214:
Page 215 and 216:
26 Methyl Ethyl ketone 200027 4-Nit
Page 217 and 218:
4. Regulatory framework5. A map ind
Page 219 and 220:
the environmental or forest norms /
Page 221 and 222:
12. Location of National Park/Wild
Page 223 and 224:
45. What is the hierarchical system
Page 225 and 226:
After detailed deliberations, the E
Page 227 and 228:
46. Corporate Environmental Respons
Page 229 and 230:
12. Project site location alongwith
Page 231 and 232:
i. All documents shall be properly
Page 233 and 234:
17. Ambient air quality monitoring
Page 235 and 236:
vi.vii.The final EIA-EMP report sub
Page 237 and 238:
11. Manufacturing process details o
Page 239 and 240:
iv. The letter/application for EC s
Page 241 and 242:
21. The suspended particulate matte
Page 243 and 244:
51. Details of Corporate Social Res
Page 245 and 246:
31. M/s Bhushan Steel Limited p32.
show all

MINUTES OF2ND RECONSTITUTED EXPERT APPRAISAL ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?