NAND Flash Memory MT29F4G08AAAWP ... - Micron

Part Numbering Information4Gb, 8Gb, and 16Gb x8 NAND Flash MemoryPart Numbering InformationMicron ® NAND Flash devices are available in several different configurations anddensities (see Figure 2).Figure 2:Part Number ChartMT 29F 4G 08 A A A WP ES :AMicron TechnologyProduct Family29F = Single-Supply NAND Flash MemoryDensity4G = 4Gb8G = 8Gb16G = 16GbDevice Width08 = 8 bitsClassification# of die # of CE# # of R/B# I/OA 1 1 1 CommonB 2 1 1 CommonD 2 2 2 CommonF 4 2 2 CommonOperating Voltage RangeA = 3.3V (2.70–3.60V)Design RevisionA = First RevisionProduction StatusBlank = ProductionES = Engineering SampleMS = Mechanical SampleQS = Qualification SampleOperating Temperature RangeBlank = Commercial (0°C to +70°C)ET = Extended 1 (-40°C to +85°C)Reserved for Future UseBlankFlash PerformanceBlank = StandardPackage CodeWP = 48-pin TSOP I (lead-free)WC = 48-pin TSOP I OCPL (lead-free)Feature SetA = Feature Set ANotes:1. For ET devices, contact factory.Valid Part Number CombinationsAfter building the part number from the part numbering chart, verify that the partnumber is offered and valid by using the Micron Parametric Part Search Web site atwww.micron.com/products/parametric. If the device required is not on this list, contactthe factory.PDF: 09005aef81b80e13/Source: 09005aef81b80eacMicron Technology, Inc., reserves the right to change products or specifications without notice.4gb_nand_m40a__1.fm - Rev. B 2/07 EN 2 ©2006 Micron Technology, Inc. All rights reserved.