Platform LSF Command Reference - SAS

lparamsSynopsisblparams [-h | -V]DescriptionDisplays the following parameter values:ADMINdisplays information about configurable License Scheduler parameters defined in the fileslsf.licensescheduler and lsf.confThe License Scheduler administrator. Defined in lsf.licensescheduler.DISTRIBUTION_POLICY_VIOLATION_ACTIONHOSTSLM_REMOVE_INTERVALLM_STAT_INTERVALLS_DEBUG_BLDThis parameter includes• The interval (a multiple of LM_STAT_INVERVAL periods) at which LicenseScheduler checks for distribution policy violations, and• The directory path and command that License Scheduler runs when reporting aviolationDefined in lsf.licensescheduler.License Scheduler candidate hosts. Defined in lsf.licensescheduler.Minimum time a job must have a license checked out before lmremove can removethe license. Defined in lsf.licensescheduler.Time interval between calls that License Scheduler makes to collect license usageinformation from FLEXnet license management. Defined inlsf.licensescheduler.Sets the debugging log class for the LSF License Scheduler bld daemon. Defined inlsf.licensescheduler.Specifies the log class filtering to be applied to bld. Messages belonging to the specifiedlog class are recorded. Not all debug message are controlled by log class.LS_DEBUG_BLD sets the log class and is used in combination with MASK, which setsthe log level. For example:LS_LOG_MASK=LOG_DEBUGLS_DEBUG_BLD="LC_TRACE"You need to restart the bld daemon after setting LS_DEBUG_BLD for your changesto take effect.Valid log classes are:blparamsPlatform LSF Command Reference 117