Platform LSF Command Reference - SAS

More documents

Recommendations

Info

hostsLOAD THRESHOLDThe total load has different meanings depending on whether the load index isincreasing or decreasing.For increasing load indices, such as run queue lengths, CPU utilization, paging activity,logins, and disk I/O, the total load is the consumed plus the reserved amount. The totalload is calculated as the sum of the current load and the reserved load. The currentload is the load seen by lsload(1).For decreasing load indices, such as available memory, idle time, available swap space,and available space in tmp, the total load is the available amount. The total load is thedifference between the current load and the reserved load. This difference is theavailable resource as seen by lsload(1).Displays the scheduling threshold loadSched and the suspending thresholdloadStop. Also displays the migration threshold if defined and the checkpoint supportif the host supports checkpointing.The format for the thresholds is the same as for batch job queues (see bqueues(1))and lsb.queues(5)). For an explanation of the thresholds and load indices, see thedescription for the "QUEUE SCHEDULING PARAMETERS" keyword under the -loption in bqueues(1).THRESHOLD AND LOAD USED FOR EXCEPTIONSADMIN ACTION COMMENTDisplays the configured threshold of EXIT_RATE for the host and its current loadvalue for host exceptions.If the LSF administrator specified an administrator comment with the -C option ofthe badmin host control commands hclose or hopen, the comment text is displayed.Output: Resource-Based -s OptionThe -s option displays the following: the amounts used for scheduling, the amounts reserved, and the associated hostsfor the resources. Only resources (shared or host-based) with numeric values are displayed. See lim(8), andlsf.cluster(5) on how to configure shared resources.The following fields are displayed:RESOURCETOTALRESERVEDLOCATIONThe name of the resource.The total amount free of a resource used for scheduling.The amount reserved by jobs. You specify the reserved resource using bsub -R.The hosts that are associated with the resource.66 Platform LSF Command Reference
hostsFilesReads lsb.hosts.See alsolsb.hosts, bqueues, lshosts, badmin, lsadminPlatform LSF Command Reference 67
Page 1 and 2:
Platform LSF Command ReferencePlatf
Page 3 and 4:
Contentsbacct .....................
Page 5 and 6:
lstcsh ............................
Page 7 and 8:
acctbacctDisplays accounting statis
Page 9 and 10:
acct-M host_list_file-m host_name .
Page 11 and 12:
acct• Average wait time in queue
Page 13 and 14:
acctEXCEPTION STATUSidleoverrununde
Page 15 and 16: acctExample: Default formatbacctAcc
Page 17 and 18: acct, Command , Job Description Mon
Page 19 and 20: acctExample: Resizable job informat
Page 21 and 22: admindiagnose [job_ID ... | "job_ID
Page 23 and 24: admin-v-fVerbose mode. Displays det
Page 25 and 26: adminIf EGO-enabled SLA scheduling
Page 27 and 28: adminhshutdown [-f] [host_name ...
Page 29 and 30: admin-c class_name ...debug_level=0
Page 31 and 32: adminsbdtime [-l timing_level] [-f
Page 33 and 34: adminstart [sample_period]stopviews
Page 35 and 36: appPENDRUNSUSPrunning on n processo
Page 37 and 38: appCHKPNT_DIRFor example:bapp -l ap
Page 39 and 40: otbbotSynopsisbbot job_ID | "job_ID
Page 41 and 42: chkpntbchkpntcheckpoints one or mor
Page 43 and 44: clustersbclustersSynopsisbclusters
Page 45 and 46: clustersokdiscconnMultiCluster jobs
Page 47 and 48: gaddExamples• Create a job group
Page 49 and 50: gdelExamplePrints LSF release versi
Page 51 and 52: gmodExamplesThe following command o
Page 53 and 54: hist-p-r-s-t-w-C start_time,end_tim
Page 55 and 56: hist-Jd "job_description"-Lp ls_pro
Page 57 and 58: histApplication ProfileCommandThe p
Page 59 and 60: hist• year is a four-digit number
Page 61 and 62: hostshost_group_status num_ok/num_u
Page 63 and 64: hostsclosedunlicensedclosed_Cu_excl
Page 65: hostsclosed_Windclosed_Fullclosed_E
Page 69 and 70: hpartSTARTEDRESERVEDCPU_TIMERUN_TIM
Page 71 and 72: jdepinfo-p-c-h-VOutputJOBIDPARENTCH
Page 73 and 74: jgroup-N-hSpecify a job group name
Page 75 and 76: jgroupSSUSPUSUSPRSVSLAThe number of
Page 77 and 78: jobs-d-lDisplays absolute priority
Page 79 and 80: jobs-ssDisplays summary information
Page 81 and 82: jobs-Lp ls_project_nameDisplays inf
Page 83 and 84: jobsEXEC_HOSTJOB_NAMESUBMIT_TIMEOut
Page 85 and 86: jobsEXITUNKWNWAITZOMBIRUNTIMETIME_L
Page 87 and 88: jobsPGIDPIDsRESOURCE LIMITSEXCEPTIO
Page 89 and 90: jobsOutput: Session Scheduler job s
Page 91 and 92: killbkillsends signals to kill, sus
Page 93 and 94: kill-J job_nameUse -g with -sla to
Page 95 and 96: kill-h-VExamplesbkill -s 17 -q nigh
Page 97 and 98: ladmin-c class_name ...-l debug_lev
Page 99 and 100: ladmincollector_name ... | all-h-VS
Page 101 and 102: launchhost_name-z host_name ...-use
Page 103 and 104: lcollectSee alsolsf.licenseschedule
Page 105 and 106: limitsblimitsdisplays information a
Page 107 and 108: limits-h-VOutputPrints command usag
Page 109 and 110: linfoblinfoSynopsisblinfo -Lp | -p
Page 111 and 112: linfoFEATUREThe license name. This
Page 113 and 114: linfoNON_SHAREDPRIORITYDESCRIPTIONT
Page 115 and 116: linfoblinfo -a does not display NON
Page 117 and 118:
lparamsSynopsisblparams [-h | -V]De
Page 119 and 120:
lparamsLSF_LIC_SCHED_HOSTSList of h
Page 121 and 122:
lstat-D service_domain_name | "serv
Page 123 and 124:
lstatNON_LSF_FREEProject outputThe
Page 125 and 126:
lstatSee alsoblhosts, blinfoPlatfor
Page 127 and 128:
ltasks-VDefault OutputPrints comman
Page 129 and 130:
lusersblusersdisplays license usage
Page 131 and 132:
lusersOTHERSLicense usage for non-m
Page 133 and 134:
mgroup-h-VOutputPrints command usag
Page 135 and 136:
mig-J job_nameMigrates jobs with th
Page 137 and 138:
mod[-J job_name | -J "%job_limit" |
Page 139 and 140:
modModifying running jobsBy default
Page 141 and 142:
modYou cannot move job array elemen
Page 143 and 144:
modSee alsobsubPlatform LSF Command
Page 145 and 146:
peekbpeekdisplays the stdout and st
Page 147 and 148:
postbpostsends external status mess
Page 149 and 150:
queuesbqueuesdisplays information a
Page 151 and 152:
queuesSTATUSOpenClosedActiveInactiv
Page 153 and 154:
queuesUSUSPRSVMigration thresholdSc
Page 155 and 156:
queuesCORELIMITSCHEDULING PARAMETER
Page 157 and 158:
queuesunderrunidleSCHEDULING POLICI
Page 159 and 160:
queuesWhen a queue is out of its di
Page 161 and 162:
queuesRECEIVE_JOBS_FROMPREEMPTIONPR
Page 163 and 164:
queuesADJUSTLSF calculates the hist
Page 165 and 166:
eadSpecifies the message index to b
Page 167 and 168:
equeueRequeues jobs that are runnin
Page 169 and 170:
esizeRequired. Defines the list of
Page 171 and 172:
estartbrestartrestarts checkpointed
Page 173 and 174:
esumebresumeresumes one or more sus
Page 175 and 176:
lainfobrlainfoSynopsisbrlainfo [-l]
Page 177 and 178:
svaddbrsvaddadds an advance reserva
Page 179 and 180:
svadd-m "host_name | host_group ...
Page 181 and 182:
svaddThe following command creates
Page 183 and 184:
svmodbrsvmodmodifies an advance res
Page 185 and 186:
svmodOptions-o-b begin_time | [+ |
Page 187 and 188:
svmod-m "host_name | host_group ...
Page 189 and 190:
svsbrsvsdisplays advance reservatio
Page 191 and 192:
unbrunforces a job to run immediate
Page 193 and 194:
slabslaSynopsisbsla [service_class_
Page 195 and 196:
slaNJOBSThe current number of jobs
Page 197 and 198:
slotsbslotsdisplays slots available
Page 199 and 200:
statusbstatusgets current external
Page 201 and 202:
stopbstopsuspends unfinished jobsSy
Page 203 and 204:
stopSuspends all jobs in the job gr
Page 205 and 206:
sub-J job_name | -J "job_name[index
Page 207 and 208:
subDefault behaviorLSF assumes that
Page 209 and 210:
subWhen you specify the -IX option,
Page 211 and 212:
subvalue is no unlimited. If the op
Page 213 and 214:
subIn some cases, the process is se
Page 215 and 216:
subSpecify a file path. Appends the
Page 217 and 218:
sub-G user_groupAn operator that sp
Page 219 and 220:
subfile in the directory specified
Page 221 and 222:
subNote:The file path of the checkp
Page 223 and 224:
subIf the host group contains the k
Page 225 and 226:
sub-o output_file• bsub -n 10,16
Page 227 and 228:
sub-p process_limitSets the limit o
Page 229 and 230:
subThe strict resource requirement
Page 231 and 232:
subSets a per-process (soft) stack
Page 233 and 234:
sub-U reservation_ID-u mail_user-v
Page 235 and 236:
subIf the job also has termination
Page 237 and 238:
subjob_ID | "job_name"The job has t
Page 239 and 240:
sub-h-Vcommand [argument]Spools a j
Page 241 and 242:
subwhere my_script contains:#!/bin/
Page 243 and 244:
switchThe job name can be up to 409
Page 245 and 246:
top-h-VSee alsobbot(1), bjobs(1), b
Page 247 and 248:
usersbusersSynopsisbusers [-w] [use
Page 249 and 250:
chchchanges the host on which subse
Page 251 and 252:
chSee alsolsrun(1), rsh(1), stty(1)
Page 253 and 254:
lsacct-u user_name ... | -u allpid
Page 255 and 256:
lsacctExit statusUNIX exit status o
Page 257 and 258:
lsadminlsadminSynopsislsadmin subco
Page 259 and 260:
lsadmin-fDisables interaction and d
Page 261 and 262:
lsadminreslogoff [host_name ... | a
Page 263 and 264:
lsadmin"host_name ..."Sets debug se
Page 265 and 266:
lsadminFor example, if EGO is enabl
Page 267 and 268:
lsclustersADMINHOSTSSERVERSLong For
Page 269 and 270:
lseligible-1 Syntax errors-10 A fai
Page 271 and 272:
lsfinstallAfter installation, lsfin
Page 273 and 274:
lsfmonlsfmonSynopsislsfmon -install
Page 275 and 276:
lsfshutdownlsfshutdownSynopsislsfsh
Page 277 and 278:
lsgrunexecutes a task on a set of h
Page 279 and 280:
lsgrunorcommand [argument ...]-h-VD
Page 281 and 282:
lshosts-s [resource_name ...]-h-VFo
Page 283 and 284:
lshostsnprocsncoresnthreadsRUN_WIND
Page 285 and 286:
lsidlsidSynopsislsid [-h | -V]Descr
Page 287 and 288:
lsinfoOutput: -l optionThe -l optio
Page 289 and 290:
lsloadDisplays only load informatio
Page 291 and 292:
lsloadswpmemioexternal_indexThe amo
Page 293 and 294:
lsloadadjlsloadadjadjusts load indi
Page 295 and 296:
lsloginlsloginremotely logs in to a
Page 297 and 298:
lsltaskslsltasksdisplays or updates
Page 299 and 300:
lsmonlsmondisplays load information
Page 301 and 302:
lsmonOutputThe following fields are
Page 303 and 304:
lspasswdlspasswdSynopsislspasswd [-
Page 305 and 306:
lsplaceExampleslsplace is mostly us
Page 307 and 308:
lsrcpfile_name-h-VExamplesUse "/" t
Page 309 and 310:
lsrtaskslsrtasksdisplays or updates
Page 311 and 312:
lsrunlsrunruns an interactive task
Page 313 and 314:
lsrunThe exit status is -1 and an e
Page 315 and 316:
lstcshUsage- Use the built-in comma
Page 317 and 318:
lstcshThis time includes all remote
Page 319 and 320:
pampamParallel Application Manager
Page 321 and 322:
pamOptions for LSF HPC generic PJL
Page 323 and 324:
patchinstallpatchinstallSynopsispat
Page 325 and 326:
perfadminperfadminSynopsisperfadmin
Page 327 and 328:
perfremoverc.shperfremoverc.shSynop
Page 329 and 330:
pmcadminpmcadminAdminister the HPC
Page 331 and 332:
pmcremoverc.shpmcremoverc.shSynopsi
Page 333 and 334:
pversions (UNIX)pversions (UNIX)Syn
Page 335 and 336:
pversions (UNIX)binary typeinstalle
Page 337 and 338:
pversions (Windows)pversions (Windo
Page 339 and 340:
ssacctOutput: default formatStatist
Page 341 and 342:
ssacctExamples: long format (-l)ssa
Page 343 and 344:
sschedTask optionsDo not delete the
Page 345 and 346:
ssched-M mem_limit-Q "exit_code ...
Page 347 and 348:
tspeektspeekdisplays the stdout and
Page 349 and 350:
tssub• Interactive bsub options (
Page 351 and 352:
wguserwguserSynopsiswguser [-r] use
Page 353 and 354:
queues -l 161CHKPNTPERIODbqueues -l
Page 355 and 356:
HHOG_FACTORbacct -l 12ssacct -l 339
Page 357 and 358:
linfo output 114blparams output 118
Page 359 and 360:
users 248pending jobsbhist -p 53PEN
Page 361 and 362:
jobs -A 88bjobs -l 84bqueues 152bsl
Page 363:
lsacct 254TURNAROUNDbacct -b 11ssac
show all

Platform LSF Command Reference - SAS

Create successful ePaper yourself

Delete template?

Save as template?