Platform LSF Command Reference - SAS

acctExample: LSF job termination reason loggingbacct -l 7265When a job finishes, LSF reports the last job termination action it took against the job and logs itinto lsb.acct.If a running job exits because of node failure, LSF sets the correct exit information in lsb.acct,lsb.events, and the job output file.Use bacct -l to view job exit information logged to lsb.acct:Accounting information about jobs that are:- submitted by all users.- accounted on all projects.- completed normally or exited- executed on all hosts.- submitted to all queues.- accounted on all service classes.------------------------------------------------------------------------------Job , User , Project , Status , Queue , Command, Job Description Thu Sep 16 15:22:09: Submitted from host , CWD ;Thu Sep 16 15:22:20: Dispatched to 4 Hosts/Processors ;Thu Sep 16 15:22:20: slurm_id=21793;ncpus=4;slurm_alloc=n[13-14];Thu Sep 16 15:23:21: Completed ; TERM_RUNLIMIT: job killed after reaching LSF run time limit.Accounting information about this job:Share group charged CPU_T WAIT TURNAROUND STATUS HOG_FACTOR MEM SWAP0.04 11 72 exit 0.0006 0K 0K------------------------------------------------------------------------------SUMMARY: ( time unit: second )Total number of done jobs: 0 Total number of exited jobs: 1Total CPU time consumed: 0.0 Average CPU time consumed: 0.0Maximum CPU time of a job: 0.0 Minimum CPU time of a job: 0.0Total wait time in queues: 11.0Average wait time in queue: 11.0Maximum wait time in queue: 11.0 Minimum wait time in queue: 11.0Average turnaround time:72 (seconds/job)Maximum turnaround time: 72 Minimum turnaround time: 72Average hog factor of a job: 0.00 ( cpu time / turnaround time )Maximum hog factor of a job: 0.00 Minimum hog factor of a job: 0.0018 Platform LSF Command Reference