Platform LSF Command Reference - SAS

queuesunderrunidleSCHEDULING POLICIESAPS_PRIORITYFAIRSHAREBACKFILLIGNORE_DEADLINEEXCLUSIVENO_INTERACTIVEONLY_INTERACTIVEConfigured threshold in minutes for underrun jobs, and the number of jobs in thequeue that have triggered an underrun job exception by finishing sooner than theunderrun thresholdConfigured threshold (CPU time/runtime) for idle jobs, and the number of jobs in thequeue that have triggered an overrun job exception by having a job idle factor less thanthe thresholdScheduling policies of the queue. Optionally, one or more of the following policiesmay be configured:Absolute Priority Scheduling is enabled. Pending jobs in the queue are orderedaccording to the calculated APS value.Queue-level fairshare scheduling is enabled. Jobs in this queue are scheduled based ona fairshare policy instead of the first-come, first-served (FCFS) policy.A job in a backfill queue can use the slots reserved by other jobs if the job can run tocompletion before the slot-reserving jobs start.Backfilling does not occur on queue limits and user limit but only on host based limits.That is, backfilling is only supported when MXJ, JL/U, JL/P, PJOB_LIMIT, andHJOB_LIMIT are reached. Backfilling is not supported when MAX_JOBS,QJOB_LIMIT, and UJOB_LIMIT are reached.If IGNORE_DEADLINE is set to Y, starts all jobs regardless of the run limit.Jobs dispatched from an exclusive queue can run exclusively on a host if the user sospecifies at job submission time (see bsub(1)). Exclusive execution means that the jobis sent to a host with no other batch job running there, and no further job, batch orinteractive, is dispatched to that host while the job is running. The default is not toallow exclusive jobs.This queue does not accept batch interactive jobs. (see the -I, -Is, and -Ip options ofbsub(1)). The default is to accept both interactive and non-interactive jobs.This queue only accepts batch interactive jobs. Jobs must be submitted using the -I, -Is, and -Ip options of bsub(1). The default is to accept both interactive and noninteractivejobs.Platform LSF Command Reference 157