Platform LSF Command Reference - SAS

lsadmin-fDisables interaction and does not ask for confirmation for starting LIMs.limshutdown [-f] [host_name ... | all]-fShuts down LIM on the local host if no arguments are supplied.Shuts down LIMs on the specified hosts or on all hosts in the cluster if the word all isspecified. You are prompted to confirm LIM shutdown.Disables interaction and does not ask for confirmation for shutting down LIMs.limrestart [-v] [-f] [host_name ... | all]-v-flimlock [-l time_seconds]-l time_secondslimunlockRestarts LIM on the local host if no arguments are supplied.Restarts LIMs on the specified hosts or on all hosts in the cluster if the word all isspecified. You are prompted to confirm LIM restart.limrestart should be used with care. Do not make any modifications until all theLIMs have completed the startup process. If you execute limrestart host_name...to restart some of the LIMs after changing the configuration files, but other LIMs arestill running the old configuration, confusion arises among these LIMs. To avoid thissituation, use reconfig instead of limrestart.Displays detailed messages about configuration file checking.Disables user interaction and forces LIM to restart if no fatal errors are found. Thisoption is useful in batch mode. limrestart -f all is the same as reconfig -f.Locks LIM on the local host until it is explicitly unlocked if no time is specified. Whena host is locked, LIM’s load status becomes lockU. No job is sent to a locked host byLSF.The host is locked for the specified time in seconds.LSF suspends all non-exclusive jobs running on the host. This is useful if a machine isrunning an exclusive job requiring all the available CPU time and/or memory. IfLSB_DISABLE_LIMLOCK_EXCL=y (to enable preemption of exclusive jobs, forexample) LSF suspends all jobs, including exclusive jobs.Unlocks LIM on the local host.resstartup [-f] [host_name ... | all]Starts RES on the local host if no arguments are specified.Platform LSF Command Reference 259