Platform LSF Command Reference - SAS

lsloadswpmemioexternal_indexThe amount of available swap space.By default, the amount is displayed in KB. The amount may appear in MB dependingon the actual system swap space. Use LSF_UNIT_FOR_LIMITS in lsf.conf to specifya larger unit for the limit (GB, TB, PB, or EB).The amount of available RAM.By default, the amount is displayed in KB. The amount may appear in MB dependingon the actual system memory. Use LSF_UNIT_FOR_LIMITS in lsf.conf to specifya larger unit for the limit (GB, TB, PB, or EB).By default, io is not shown.If -l is specified, shows the disk I/O rate exponentially averaged over the last minute,in KB per second.By default, external load indices are not shown.If -l is specified, shows indices for all dynamic custom resources available on the host,including shared, string and Boolean resources.If -I load_index is specified, only shows indices for specified non-shared (host-based)dynamic numeric custom resources.Resource-Based Output (lsload -s)Displays information about dynamic resources (shared or host-based). Each line gives the value and the associatedhosts for an instance of the resource. See lim(8), and lsf.cluster(5) for information on configuring dynamic sharedresources.The displayed information consists of the following fields:RESOURCEVALUELOCATIONExamplesName of the resource.Value for an instance of the resource.Hosts associated with the instance of the resource.lsload -R "select[r1m=20 && type==ALPHA]"OR, in restricted format:lsload -R r1m=0.5:swp=20:type=ALPHAPlatform LSF Command Reference 291