Installation Manual - Unical Lattner Condensing Hot Water Boilers

More documents

Recommendations

Info

Instructions for the installerINSTALLATION OF FOUR ALKON 90 IN BATTERY968423572211 - 41010081 = Alkon 90 Master (NG)with side panels and flanges41010082 = Alkon 90 Master (LPG)with side panels and flanges2 - 41010046 = Alkon 90 (NG)41010047 = Alkon 90 (LPG)3 - 00361528 = External frame for safety devices kit4 - 00361529 = Additional safety kit and manifold5 - 00361316 = Additional protection and control kit6 - 00361525 = Outdoor cover kit for 4 modules + 17 - 00361487 = Hydraulic header connection DN 1008 - 00361489 = Kit filter kit Y DN1009 - 00361500 = Hydraulic header kit up to 180-450 kWDn100Note:The insulation of the battery flow and return manifoldsis suggested.REGULATION ACCESSORIES00361332 = E8 regulator kit00361359 = Box for E8 regulator kit00361358 = BM8 remote control kit00361602 = BCM panel kitSMOKE ACCESSORIES00361493 = Vertical flue terminal Ø 10000361494 = Horizontal flue terminal Ø 10000361495 = Extension Ø 100 L = 100000262514 = Elbow 90° Ø 10000262476 = Elbow 45° Ø 10040
Instructions for the installer3.21 - FILLING THE SYSTEMWarning!Do not mix the CH system’s water with antifreezeor anti-corrosion solutions using wrongconcentrations! It could cause damage to thewashers and could provoke noise duringnormal boiler operation.UNICAL refuses all liability for injury to persons,animals or damage to property deriving fromnot having respected the above mentionedrecommendations.The boiler is equipped with its own drain cock, whose positionis shown in the figure of page 11. This cock never has tobe used for the drain of the system, because all the dirtinessof the installation could accumulate in the boiler, compromisingits operation.. For that reason the installation must beequipped with own drain cock, correctly sized according tothe installation water content.Once all the connections are made, it is possible to fill thecircuit.For the filling of the system it is necessary to fit a fillingvalve on the C.H. return.EXAMPLE OF FILLING-UP SYSTEM MANIFOLDFilling manifold41
Page 1: ALKON 9000332917 - 1 st edition - 0
Page 5 and 6: 1.6 DATA BADGECE Marking- The CE ma
Page 7 and 8: 2TECHNICAL FEATURESAND DIMENSIONSTe
Page 9 and 10: Technical features and dimensionsDI
Page 11 and 12: Technical features and dimensions2.
Page 13 and 14: 2.5 - PERFORMANCE DATA ACCORDINGTO
Page 15 and 16: Instructions for the installer3.2 -
Page 17 and 18: 3.5 - INSTALLATION ON EXISTINGHEATI
Page 19 and 20: Instructions for the installer3.10
Page 27 and 28: Connection of the additional safety
Page 33 and 34: Instructions for the installerINSTA
Page 35 and 36: Instructions for the installerINSTA
Page 37 and 38: 3.20 - EXAMPLES OF CONNECTION WITH
Page 39: Instructions for the installerINSTA
Page 45 and 46: 3.24 - PROGRAMMING OF THE OPERATING
Page 47 and 48: Servicing schedule4SERVICINGSCHEDUL
Page 49 and 50: Servicing scheduleService operation
Page 51 and 52: Fault findingCode:Description: Modu
Page 53: DECLARATION OF CONFORMITYLaAG s.p.a

Installation Manual - Unical Lattner Condensing Hot Water Boilers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?