Installation Manual - Unical Lattner Condensing Hot Water Boilers

1.6 DATA BADGECE Marking- The CE marking documents that the boilers satisfy:- The essential requirements of the Directive regarding gas appliances (Directive90/396/CEE)General Information- The essential requirements of the Directive regarding electromagnetic compatibility(Directive 89/336/CEE)- The essential requirements of the Efficiency Directive (Directive 92/42/CEE)- The essential requirements of the low voltage Directive (Directive 73/23/CEE)®123546A7 891110121314B151716181920CD21 2224 25 2623E2728LEGEND:1 = Year of CE certification issue2 = Boiler type3 = Boiler model4 = Number of stars (Directive 92/42/CEE)5 = (S.N°) Serial number6 = P.I.N. code7 = Approved fluing configurations8 = (N0x) N0x classA = Central Heating circuit features9 = (Pn) Nominal output10 = (Pcond) Condensing nominal output11 = (Qmax) Nominal heat input12 = (Adjusted Qn) Adjusted for nominal Heat input13 = (PMS) Max. pressure C.H. system14 = (T max) Max. C.H. temperatureB = Domestic Hot Water circuit features15 = (Qnw) Nominal heat input in D.H.W. mode (if different from Qn)16 = (D) Specific D.H.W. flow rate according to EN 625 - EN 13203-117 = (R factor) N° taps based on the quantity of water declared EN13203-118 = (F factor) N°stars based on the quality of water declaredEN 13203-119 = (PMW) Max. pressure D.H.W. system20 = (T max) Max. temperature D.H.W systemC = Electrical features21 = Electrical power supply22 = Consumption23 = Protection gradeD = Countries of destination24 = Direct and indirect country of destination25 = Gas family26 = Supply pressureE = Factory setting27 = Adjusted for gas type X28 = Space for national brands5