KEMPER - Repa-Tec Lastechniek

Hand plasma tablesKEMPER hand plasma tablesThese extraction tables have especiallybeen developed for the cutting of smallerworkpieces.The ergonomically adapted, stable sheetsteel construction and the robust materialsupport of flat steel enable a comfortableand safe functioning.The table which is available in differentsizes can be connected to an extractionunit.Hand plasma tablesSolidly built hand plasma table with strong steel supports and grating for smaller cut outparts.Part No. Description ₤197 0033 table dimensions: w = 1,600 mm, d = 1,100 mm,h = 800 mm aspiration port: Ø 160 mm 1.355,00197 0002 table dimensions: w = 1,100 mm, d = 800 mm, h= 800 mm, aspiration port: Ø 160 mm 1.497,00Suitable filter unitsHand plasma tables Extraction capacity (max.) Part No.197 0033 2.000 m³/h 81 0200 020197 0002 2.500 m³/h 81 0250 030The airflow which is needed to connect several tables to a filter unit can be calculated byadding the required airflow per table. For corresponding filter units see page 71.101 |