KEMPER - Repa-Tec Lastechniek

Exhaust setwith rigid metal tube armThe KEMPER exhaust set consists of a 2 m, 3 m or 4 m longexhaust arm, a fan with wall bracket and a motor protectionswitch. For use where it is not absolutely necessary to filter theair.KEMPER exhaust arms are excellent for the extraction of weldingsmoke, gases, vapors, light dust and solvents.The hose-type exhaust arm consists of an internal parallelogramsupport linkage with spring support and a polyester fabricreinforced hose with PVC coating with coiled steel wire bondedin. The 360° rotating evacuation hood with throttle valve can beswiveled in all directions.The fans were designed especially for connection toKEMPER exhaust arms.The housing and impeller consist of non-sparking, cast silumin.The impeller is balanced statically and dynamically.This ensures perfectly smooth operation and minimum noisedevelopment. The housing has a powder finish. Includingconnection flange for Ø 160 mm exhaust pipe.Technical dataFan permormance:Motor power:Power supply:Exhaust arms type:Length of exhaust arms / cranes:2.000 m³/h0,75 kW3 x 400 V / 50 HzRigid metal tube arm2 m, 3 m, 4 mExhaust set with rigid metal tube armPart No. Description ₤79 502 201 Exhaust set with rigid metal tube arm,Length 2 m, Ø 150 mmFan: 2.000 m³/h, 0,75 kW 1.357,0079 503 201 Exhaust set with rigid metal tube arm,Length 3 m, Ø 150 mmFan: 2.000 m³/h, 0,75 kW 1.451,0079 504 201 Exhaust set with rigid metal tube arm,Length 4 m, Ø 150 mmFan: 2.000 m³/h, 0,75 kW 1.545,0023 |