KEMPER - Repa-Tec Lastechniek

KEMPER variohoodModular exhaust hoodThe new modular extraction hood fromKEMPER can be adapted to fit anyindividual requirement. It is available indifferent sizes as standard.The modular extraction can be set upon supporting stands or suspendedfrom the ceiling, allowing the hood to beplaced where it is not possible to positionthe extraction directly at source.The extraction hood can fitted withwelder protection strips from theKEMPER range. The suspension of theextraction hood with strips ensures thebest possible protection from glare andwelding spatter. The KEMPER stripsmeet DIN EN 1598.The KEMPER extraction hood has aninnovative flow principle, giving it aparticularly high extraction efficiency atvery low air volumes, and thus lowerenergy consumption.Mode of operationThanks to the unique flow principle it is possible to achieve a high extraction efficiencyat a very low air volume. The dust roduced is drawn through small, elongatedopenings on the inner edges of the extraction hood. The extraction hood can be fullyfitted out with strips to reduce the occurrence of sparks, thus protecting not only thestaff but the entire equipment. Furthermore, the dust incurred during welding andcutting cannot escape through the hanging strips. The length of the strips can beindividually altered to suit your requirements.| 86