KEMPER - Repa-Tec Lastechniek

Displacement VentilationIndividually adapted to local needs with ideal air flow -This is where KEMPER displacement ventilation excels.KEMPER Displacement Ventilation is particularly suited toremoving medium to heavy accumulation of welding fumes orother pollutants.It is individually customised to suit the situation on site and inthis way particular areas of a production hall can be ventilatedindividually. Separate areas for welding work can be createdwithout further ado. Thanks to their optimised air flow, thesesystems ensure acceptable dust quantities in the work area.And what is more, with a limited noise level, low costs and ontop of that huge energy savings.Installing the system is as simple as you can imagine; it is merelya question of installing the ductwork as well as a centralextraction and filter system. Setting up extraction elements,such as suction arms, is dispensed with.How it worksThe extraction ducts suck in the contaminated air at a heightof around 4-6 metres. The air is then filtered and led downwardsto the outlet ducts near ground level, a branching ductwith what are known as displacement outlets.From here the purified, warmed air rises and displaces thewelding fumes once again towards the extraction duct. In thisway, a constant, circulating air flow is created which reduces(captures) the welding fumes at the workplaces. This way, asuspended layer of particles composed of smoke and dust(smoke veil) cannot form in your workshop.Displacement ventilation systems can be individually adaptedto any size of factory building.A KEMPER Displacement Ventilation System is the rightsolution, because personal protective equipment, such as theKEMPER autoflow XP ® respiratory protection system doesindeed protect the welder from fine particulates, but not hisworkmates nor your machines and facilities.69 |