KEMPER - Repa-Tec Lastechniek

High-vacuum extraction and filter unitSuitable for alveole exchangeable dustsseparation > 99 % of particles < 0,4 μmHigh-vacuum extraction and filter units of the system 9000 arevery suitable for the connection of several extractionelements and for the construction of central extraction systemsfor welding workshops, grinding shops or the like.The extracted harmful substances will be separated at thesurface of the KemTex ® ePTFE membrane filter. The control,based on a Siemens Simatec S7, monitors the collected duston the surface of the cartridges. On reaching a certain limit itautomatically activates the cleaning process during operation ofthe unit.The robust filter unit, contructed of reinforced steel panels,consists of two parts being connected on site.The following table gives an overview of the standard units.Units with higher outputs are available.For further information on extraction and filtration units system9000 see chapter „Extraction and filter units“.Technical dataPart No. 91 0330 030 91 0400 040 91 0450 060Fan performance: 3.300 m³/h 4.000 m³/h 4.500 m³/hMax. low-pressure: 18.000 Pa 18.000 Pa 20.000 PaMotor power: 22,0 kW 30,0 kW 37,0 kWPower supply: 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 3 x 400 V / 50 HzFilter medium:KemTex ® ePTFE membrane filterFilter effeciency:99,99 %, Filter classification L, MCompressed air supply:5 – 6 bar; clean, dry and free of oilWeight: 1.050 kg 1.150 kg 1.350 kgDimensions (w x d x h): 2.375 x 1.413 x 2.015 mm 2.826 x 1.413 x 2.015 mm 3.277 x 1.413 x 2.015 mm33 |