Guide to the safe handling of solvents in a bituminous ... - Aapaq.org

product identifier (product name); owner's name (name of Principal Investigator who prepared thesample); laboratory number and building; emergency telephone number.When samples are greater than 10kg, the label affixed to thecontainer must meet the requirements of a supplier label.Laboratory samples should not be sent via internal mail.• Material Safety Data Sheets - See Appendix C (The managementand interpretation of material and safety data sheets - for binderand asphalt laboratories);• Education and training - Training and education provides moredetailed instruction on the specific procedures necessary to carry outwork safely. Training can be divided into two parts: general trainingand job-specific training: General training: This is basic training that an organisation isrequired to conduct so that all personnel whose work function mayresult in health, safety or environmental incidents undergoappropriate training. This training should provide instruction on theclassification of products; include risks and precautions, (hazardregister) and the content, purpose and interpretation of informationfound on labels and in MSDS; Job-specific training: This refers to training in the proceduresand test methods employed by a particular laboratory, and wouldinclude training on the safe handling and storage of productsspecific to that laboratory (including spill and leak training, wastedisposal and basic first aid instructions). Job-specific training isusually the responsibility of the laboratory supervisor. Trainingrequirements shall be established, taking the following intoaccount:¨¨¨¨New employees during their induction period in theorganisation;New employees during their job-specific training;Existing employees when there is a change in their duties;When new equipment or materials are introduced (changemanagement procedure);37