Guide to the safe handling of solvents in a bituminous ... - Aapaq.org

More documents

Recommendations

Info

esponse personnel for identification of materials during transportationemergencies. NA (North American) numbers are assigned by TransportCanada and the US Department of Transport to materials they considerhazardous and to which a UN number has not been assigned;vapour - a gaseous form of a material which is normally solid or liquid atroom temperature and pressure;vapour density - the density of a vapour compared to the density of anequal amount of air;vapour pressure - the pressure of a vapour in equilibrium with its liquid orsolid form;ventilation - the movement of air;vesicant - a chemical which, if it can escape from the vein, causesextensive tissue damage, with vesicle formation or blistering;VOCs - Volatile Organic Compounds;volatility - the ability of a material to evaporate.List of Sources to Help Identify Hazards of Chemicals1. EPA FACT Sheets:www.epa.gov/enviro/html/emci/chemref/index.html2. ASTDR ToxFAQs:www.atsdr.cdc.gov/toxfaq.html3. EPCRA Overview:http://yosemie.epa.gov/oswer/ceppoweb.nsf/contenl/ehs_2003.htm4. Integrated RISK Information System:www.epa.gov/IRIS/5. Workplace Hazardous Materials Information System (WHMIS):www.hc-se.gc.ca/hecs-sesc/whmis/index.htm6. Occupational Health and Safety Administration (OSHA):www.osha.gov3. MSDS of solvents pertaining to the reportPlease note:• Paraffin in South Africa is known as kerosene in the USA;• Glycerine or glycerol in South Africa is known as glycerin in the USA;98
• Many of the occupation exposure limits in the MSDS sheet should beconsidered as guidelines - limits set by South African legislation areenforceable and will take precedence;• TCE, chloroform, dichloromethane have been reported to becarcinogens;• Ensolv (brand name for n-propyl bromide) causes irritation to thelungs where there is a pre-existing lung condition - some skin/eyeirritation reported. Should be used in well ventilated area to avoidheadaches, dizziness and nausea;• When exposed to more than one chemical/agent, synergistic effectsare often reported in the literature. That is, the combined effects oftwo or more agents are often worse the sum of the individual effects4. References and links to international MSDS sourceshttp://www.sciencelab.com/msdsList.phphttp://www.mallbaker.com/europe/msds/default.asphttp://www.elcosh.org/docs/d0800/d000828/d000828.htmlhttp://www.albatross-usa.com/pdf/elecchemmsds/AlbatrossVDS3000MSDS.pdf http://www.coastwidelabs.com/MSDS.htm5. Useful sources for local MSDSNote: Suppliers of hazardous chemical substances have a duty to supplyan up-to-date MSDS to the purchaser/user of the substance. Users mustensure that the MSDS is obtained and held on file and regular checksshould be done to ensure that that MSDS are not outdated (in particularwith regard to local emergency contact information).http://www.msdssearch.com/ http://www.mycrochem.co.za/msds/http://www.engen.co.za/home/apps/content/products_services/msds/CategoryList.aspxhttp://www.euapps.shell.com/MSDS/GotoMsdshttps://cglapps.chevron.com/msdspds/HomePage.aspxhttp://www.totaltec.co.za/drawmenu.php?guid=1http://www.ikusasachemicals.co.za/www.ikusasachemicals.co.za/index.html99
Page 1:
Guide to the safe handling ofsolven
Page 4 and 5:
Sabita DVD SeriesDVD100DVD200DVD300
Page 6 and 7:
CONTENTS1. Introduction2. Solvent s
Page 8 and 9:
• The use of High Performance Liq
Page 10 and 11:
2. Solvent specific test methods2.1
Page 12 and 13:
• A mass balance requires a tempe
Page 14 and 15:
*Jojoba oil (pronounced “ho-HO-ba
Page 16 and 17:
properties of the recovered binder.
Page 18 and 19:
Table 1. Coefficients of variationM
Page 20 and 21:
• Temperature - Although binder h
Page 23 and 24:
• Density - In general, a solvent
Page 25 and 26:
2.5. The determination of the softe
Page 27 and 28:
4. Evaluating the cost-effectivenes
Page 29 and 30:
6. Conclusions and recommendationsT
Page 31 and 32:
absorptive limestone). In this way
Page 33 and 34:
13. Peterson, GD, Davison, RR, Glov
Page 35 and 36:
in a location close to where the pr
Page 37 and 38:
product identifier (product name);
Page 39 and 40:
eye wash bottles and safety showers
Page 41 and 42:
• reaction to naturally-occurring
Page 43 and 44:
consulting the MSDS for the product
Page 45 and 46:
those which could compromise an ind
Page 47 and 48: • Reactive chemicals May be sensi
Page 49 and 50: The following guidelines should be
Page 51 and 52: mercury air concentrations. If a la
Page 53 and 54: Be prepared to repeat the process i
Page 55 and 56: Leaking regulators, cylinder valves
Page 57 and 58: Peroxide-forming (e.g. ether) and e
Page 59 and 60: • Direct connections: Direct conn
Page 61 and 62: This guide is available on the UK H
Page 63 and 64: Factors that can increase the risk
Page 65 and 66: containers that may be contaminated
Page 67 and 68: Record each run in a logbook: keep
Page 69 and 70: • Gas chromatographs (GC): Gas ch
Page 71 and 72: Locate and know how to test and ope
Page 73 and 74: Do not remove a dressing that has b
Page 75 and 76: As soon as the flames are extinguis
Page 77 and 78: Appendix B - Recommendations for so
Page 79 and 80: • All packages in storage should
Page 81 and 82: Table 2.Examples of incompatible co
Page 83 and 84: Table 3. Suggested segregation for
Page 85 and 86: • Keep picric acid solutions wet
Page 87 and 88: peroxides. The radius shall be meas
Page 89 and 90: acute health effect - an effect tha
Page 91 and 92: 8 Corrosive; 9 Miscellaneous.ED50 (
Page 93 and 94: freezing point - the temperature at
Page 95 and 96: airborne substance, averaged over a
Page 97: teratogen - chemical which may caus
show all

Guide to the safe handling of solvents in a bituminous ... - Aapaq.org

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?