Technical Manual - Tyrolia

80 / CHECK IT OUT
1. Customer concerns
2. Service bulletins – maintenance
3. Suitability
4. Availability – parts/tools/technical info
5. Boot/binding compatibility
6. Compatibility of under-binding options
7. Defects:
1. a) parts – cracked/corroded/missing
1. b) boot contact area – worn/damaged
1. c) boot contact area – contaminated
1. d) screws – missing/protruding
1. e) brake/rollers/AFD – malfunctioning
1. f) positioning/alignment – incorrect
8. Binding to boot adjustments
9. INITIAL ASSESSMENT
1. Customer concerns
2. Service bulletins – tuning requirements
3. Suitability
4. Defects:
1 .a) delaminated
1 .b) edge pulled out
1 .c) cracked side wall
1 .d) warped, bent, twisted
1. e) damaged tip/tail protector
1 .f) lost camber
1. Customer concerns
2. Service bulletins – fitting requirements
3. Suitability
4. ISO sole dimensions – Adult/Child
5. Sole hardness/material
6. Defects:
1. a) sole – warped
1. b) contact area – damaged/worn
1. c) contact area – contaminated
1. d) shell/liner/buckle – damaged
7. Type/position of foot bed/fitting aids
8. INITIAL ASSESSMENT
USED BINDING CHECKLIST
USED SKI CHECKLIST
▲
CONTENTS
10. Tests:
1. a) screw tightness
1. b) antishock travel
1. c) compatibility (if indicated)
1. d) release indicator verfication
1. e) accelerated life cycle
(with permission)
11. FINAL ASSESSMENT
5. INITIAL ASSESSMENT
6. Base/edge condition/thickness
7. Base/edge profile
8. FINAL ASSESSMENT
USED BOOT CHECKLIST
Reprinted with the permission of Vermont Safety Research.
For more information log on to check-itout.com
9. Fit:
1. a) foot anomalies
1. b) foot/boot size comparison
1. c) foot in boot evaluation
10. Performance adjustments
11. FINAL ASSESSMENT
▲