STC Connectors - Duncan Rogers

STC InsertionLength andConnectionDimensionsInsertion Length/Length LossThe insertion length is thelength measured from theend of the inserted maleSTC nose to the outsideface of the female STC half.This is the length of theSTC male half that is insideof the female half after it isinserted. This insertion length(or length loss) should betaken into account whendetermining overall productassembly lengths.LLAdapterDirect PortAVG INSERTION LENGTH/AVG INSERTION LENGTH/DASH LENGTH LOSS OF LENGTH LOSS OFSIZE STC W/ADAPTERS STC DIRECT PORTmm (in.)mm (in.)-06 13.9 (0.55) 13.9 (0.55)-08 18.4 (0.73) 18.4 (0.73)-10 21.1 (0.83) 20.8 (0.82)-12 25.4 (1.00) 25.1 (0.99)-16 30.2 (1.19) 30.2 (1.19)Engagement Length/Connection DimensionThe engagement length ismeasured on a connectedSTC assembly and extendsfrom the face (or end) ofthe STC female half to theface of the hex/round stockbehind the release sleeve onthe male half.LLAdapterDirect PortENGAGEMENT LENGTH/ENGAGEMENT LENGTH/DASH CONNECTION DIMENSION CONNECTION DIMENSIONSIZE OF STC W/ADAPTERS OF STC DIRECT PORTmm (in.)mm (in.)-06 4.9 (0.19) 5.5 (0.22)-08 5.3 (0.21) 6.4 (0.25)-10 6.1 (0.24) 6.8 (0.27)-12 6.1 (0.24) 6.8 (0.27)-16 5.9 (0.23) 5.9 (0.23)12EATON HYDRAULICS STC Connectors A-MEFI-MC002-E April 2004