STC Connectors - Duncan Rogers

Formed MaleSTC Tubing(Carbon Steel)Eaton offers low-pressuretubing with male STC endconfigurations for use withsteel tubing that meetsSAEJ525 specifications.The product design hasbeen subjected to a fulltest regimen. Reusabilityhas been proven by testingthis product to manycycles of connection anddisconnection.Advantages• Eliminates the braze jointsand potential leak paths• Reduced weight comparedto standard STCconnections• Formed male is an integralpart of the tubing• Can be used with standardSTC female connections• Can be used in conjunctionwith formed nipples usedwith FC699 and FC498hosesNOTE:Minimum straight tangent of the tube bends notto be below 2 x O.D. on all sizes measured fromthe front of the bead.Characteristics• Sizes available:-6, -8, -10, -12• Maximum operatingpressure of 500 psi• 4:1 safety factor• Use with hydraulic fluids,air, water, fuel, andrefrigerants*• 28 In./Hg vacuum capable• Temperatures of:-40°F to +300°** Check the o-ring seal material toensure that the elastomer is compatiblewith your intended application.Tubing wall thicknessesare as follows:SIZE TUBING THICKNESS-6 0.035”-8 0.035”-10 0.049”-12 0.049”Distance from formed malenose to the front of therear bead:SIZEL1mm (in.)-6 18.9 (0.74)-8 23.8 (0.94)-10 27.2 (1.07)-12 31.6 (1.24)Contact Eaton for availability andapplication information.L 1EATON HYDRAULICS STC Connectors A-MEFI-MC002-E April 200427