Bernese GNSS Software Version 5.2 Tutorial

7 Additional ExamplesIt is important to enable the option “Exclude sat. with accuracy code 0” if you process orbitsthat are not provided by CODE (label “COD”).The precise GLONASS orbit files from the IGS contain the GLONASS broadcast clockinformation (instead of no clock corrections for GLONASS as in the CODE productfiles). This leads to two differences with respect to the use of the standard productsfrom CODE:• The messages on missing GLONASS satellites clocks are not displayed (at least notfor all GLONASS satellites).• Because the Bernese GNSS satellite clock files contain also clock corrections forthe GLONASS satellites, the program CODSPP may compute the inter–system biasbetween IGSF–time scale (GPS satellite clocks in the IGS final product files) andGLONASS broadcast time system.Both differences have no impact on the obtained results.For some days a message like this may appear:### PG PRETAB: SATELLITE CLOCK VALUES MISSINGSATELLITE : 1FILE NUMBER: 1FILE NAME : ${P}/INTRO/ORB/GNSS2080.PREPage 104AIUB